TrueScaleAudio
Compare speakers at true scale
Pick two speakers and see them side by side at their real-world size.
Front view — side by side at true scale
Click either cabinet to swap A ↔ B · Reference height: 41.3 in · 1 in = 13.55 px
Dynaudio Contour LegacyvsT+A Talis S 330
The T+A Talis S 330 stands 105.0 cm tall — about 5.5 cm more than the Dynaudio Contour Legacy at 99.5 cm. At 90 dB against 87 dB, the Dynaudio Contour Legacy is the easier load to drive and plays louder from the same amplifier. The T+A Talis S 330 reaches deeper in the bass, down to 25 Hz versus 42 Hz. Low frequencies come from a 180 mm cone on the Dynaudio Contour Legacy and a 170 mm cone on the T+A Talis S 330. Both land in a similar price bracket, around $13,750 a pair.
| A | B | |
|---|---|---|
| Manufacturer | Dynaudio | T+A |
| Model | Contour Legacy | Talis S 330 |
| HiFi ladder position | #53 of 276 floorstander | #96 of 276 floorstander |
| Height | 39.2 in | 41.3 in |
| Width | 8.2 in | 8.3 in |
| Depth | 13.9 in | 11 in |
| Weight | 71.7 lb | 72.8 lb |
| Enclosure | bass-reflex-rear | bass-reflex-rear |
| Drivers | 1× 1.1 in tweeter (Esotar 3 soft dome), 2× 7.1 in woofer (MSP cone) | 2× 6.7 in woofer (aluminium), 1× 4.7 in midrange (aluminium), 1× 1 in tweeter (dome) |
| Frequency — low | 42 Hz | 25 Hz |
| Frequency — high | 29000 Hz | 40000 Hz |
| Sensitivity | 90 dB | 87 dB |
| Impedance | 4 Ω | 4 Ω |
| Recommended amp | — | — |
| MAP (USD) | $14,000 / pair | $13,500 / pair |
| Where to buy | Check availability ↗ | Check availability ↗ |
| Brand website | dynaudio.com ↗ | ta-hifi.de ↗ |
| Product page | Open product page ↗ | Open product page ↗ |
Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.