TrueScaleAudio
Compare speakers at true scale
Pick two speakers and see them side by side at their real-world size.
Front view — side by side at true scale
Click either cabinet to swap A ↔ B · Reference height: 1104 mm (110.4 cm) · 1 mm = 0.51 px
Q Acoustics 5050vsSonus Faber Olympica III
The Q Acoustics 5050 and the Sonus Faber Olympica III stand at nearly the same height, around 110.0 cm tall. On footprint the Q Acoustics 5050 is the wider cabinet (39.7 cm versus 37.6 cm). At 91.8 dB against 90 dB, the Q Acoustics 5050 is the easier load to drive and plays louder from the same amplifier. The Q Acoustics 5050 reaches deeper in the bass, down to 37 Hz versus 42 Hz. Low frequencies come from a 150 mm cone on the Q Acoustics 5050 and a 165 mm cone on the Sonus Faber Olympica III.
| A | B | |
|---|---|---|
| Manufacturer | Q Acoustics | Sonus Faber |
| Model | 5050 | Olympica III G3 |
| HiFi ladder position | #127 of 269 floorstander | #136 of 269 floorstander |
| Height | 1100 mm | 1104 mm |
| Width | 397 mm | 376 mm |
| Depth | 439 mm | 459 mm |
| Weight | 24.8 kg | 35 kg |
| Enclosure | bass-reflex-rear | bass-reflex-rear |
| Drivers | 1× 25 mm tweeter (soft dome), 2× 150 mm mid-bass (C³ continuous curved cone) | 1× 28 mm tweeter (silk dome), 1× 165 mm midrange (Camelia paper cone), 2× 165 mm woofer (paper cone) |
| Frequency — low | 37 Hz | 42 Hz |
| Frequency — high | 30000 Hz | 40000 Hz |
| Sensitivity | 91.8 dB | 90 dB |
| Impedance | 6 Ω | 4 Ω |
| Recommended amp | 25–150 W | 50–300 W |
| MAP (USD) | $2,499 / pair | — |
| Where to buy | Check availability ↗ | Check availability ↗ |
| Brand website | qacoustics.com ↗ | sonusfaber.com ↗ |
| Product page | Open product page ↗ | Open product page ↗ |
Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.