TrueScaleAudio
Compare speakers at true scale
Pick two speakers and see them side by side at their real-world size.
Front view — side by side at true scale
Click either cabinet to swap A ↔ B · Reference height: 386 mm (38.6 cm) · 1 mm = 1.45 px
Sonus Faber Electa Amator IIIvsDali Epicon 2
The Dali Epicon 2 stands 38.6 cm tall — about 1.1 cm more than the Sonus Faber Electa Amator III at 37.5 cm. On footprint the Sonus Faber Electa Amator III is the wider cabinet (22.6 cm versus 21.4 cm). At 88 dB against 87 dB, the Sonus Faber Electa Amator III is the easier load to drive and plays louder from the same amplifier. The Sonus Faber Electa Amator III reaches deeper in the bass, down to 40 Hz versus 47 Hz. Low frequencies come from a 180 mm cone on the Sonus Faber Electa Amator III and a 165 mm cone on the Dali Epicon 2. On price, the Sonus Faber Electa Amator III sits higher — about $10,000 a pair against $8,500 for the Dali Epicon 2.
| A | B | |
|---|---|---|
| Manufacturer | Sonus Faber | Dali |
| Model | Electa Amator III III | Epicon 2 |
| HiFi ladder position | #124 of 215 bookshelf | #137 of 215 bookshelf |
| Height | 375 mm | 386 mm |
| Width | 226 mm | 214 mm |
| Depth | 360 mm | 366 mm |
| Weight | 12.5 kg | 10.3 kg |
| Enclosure | bass-reflex-rear | bass-reflex-rear |
| Drivers | 1× 28 mm tweeter (H28 soft dome with DAD), 1× 180 mm mid-bass (MW18 paper cone) | 1× 29 mm tweeter (soft dome), 1× 165 mm mid-bass (wood-fibre cone) |
| Frequency — low | 40 Hz | 47 Hz |
| Frequency — high | 35000 Hz | 30000 Hz |
| Sensitivity | 88 dB | 87 dB |
| Impedance | 4 Ω | 4 Ω |
| Recommended amp | 35–125 W | 50–200 W |
| MAP (USD) | $10,000 / pair | $8,500 / pair |
| Where to buy | Check availability ↗ | Check availability ↗ |
| Brand website | sonusfaber.com ↗ | dali-speakers.com ↗ |
| Product page | Open product page ↗ | Open product page ↗ |
Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.