TrueScaleCompare speakers at true scale.
TrueSpecsCompare technical specifications (up to 4 speakers).HiFi LadderBrowse every speaker side by side, ordered by size or by price.HiFi SearchFind speakers by the specs you want.TrueScaleAudio
Compare speakers at true scale
Pick two speakers and see them side by side at their real-world size.
References
Front view — overlaid at true scale
AT+A Pulsar S 130BKEF R5 Meta
T+A Pulsar S 130vsKEF R5 Meta
The KEF R5 Meta stands 107.2 cm tall — about 7.2 cm more than the T+A Pulsar S 130 at 100.0 cm. At 87 dB against 86 dB, the KEF R5 Meta is the easier load to drive and plays louder from the same amplifier. The T+A Pulsar S 130 reaches deeper in the bass, down to 32 Hz versus 52 Hz. Low frequencies come from a 150 mm cone on the T+A Pulsar S 130 and a 130 mm cone on the KEF R5 Meta. Both land in a similar price bracket, around $5,950 a pair.
| A | B | |
|---|---|---|
| Manufacturer | T+A | KEF |
| Model | Pulsar S 130 | R5 Meta Meta |
| HiFi ladder position | #56 of 276 floorstander | #111 of 276 floorstander |
| Height | 1000 mm | 1072 mm |
| Width | 270 mm | 269 mm |
| Depth | 370 mm | 344 mm |
| Weight | 22.5 kg | 24.5 kg |
| Enclosure | bass-reflex-front | bass-reflex-rear |
| Drivers | 2× 150 mm woofer (StarStabilizer), 2× 115 mm midrange (StarStabilizer), 1× 25 mm tweeter (magnesium dome) | 1× 25 mm tweeter (MAT aluminium dome), 1× 125 mm midrange (aluminium cone), 2× 130 mm woofer (hybrid aluminium cone) |
| Frequency — low | 32 Hz | 52 Hz |
| Frequency — high | 45000 Hz | 28000 Hz |
| Sensitivity | 86 dB | 87 dB |
| Impedance | 4 Ω | 4 Ω |
| Recommended amp | — | 15–200 W |
| MAP (USD) | $5,900 / pair | $5,999 / pair |
| Where to buy | Check availability ↗ | Check availability ↗ |
| Brand website | ta-hifi.de ↗ | international.kef.com ↗ |
| Product page | Open product page ↗ | Open product page ↗ |
Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.

