# Lorenzo Audio LM3

Floorstanding passive loudspeaker, made by Lorenzo Audio (🇪🇸 ES).

Source: https://truescaleaudio.com/en/speaker/lorenzo-audio-lm3
Manufacturer page: https://lorenzoaudio.com/lm3/

## Dimensions

| Dimension | Metric | Imperial |
| --- | --- | --- |
| Height | 1170 mm | 46.1 in |
| Width | 515 mm | 20.3 in |
| Depth | 415 mm | 16.3 in |
| Weight (each) | 55 kg | 121 lb |

## Drivers

- 1 × 305 mm (12 in) woofer — paper cone, 12-inch
- 1 × tweeter — AMT, air-motion transformer

## Specifications

| Specification | Value |
| --- | --- |
| Type | Floorstanding |
| Power | Passive |
| Enclosure | Bass reflex, down-firing port |
| Frequency response | 25–23000 Hz |
| Sensitivity | 94 dB |
| Impedance | 8 Ω nominal |
| Recommended amplifier | 20–300 W |

## About

The two-way of the range, and the one that swaps the compression horn for an AMT: a 12-inch paper cone and an air-motion transformer, 25 Hz to 23 kHz, 94 dB. It is also the only Lorenzo that fires its ports at the floor — two of them, downward into the gap its plinth leaves — which is why a 1.17 m cabinet only 41.5 cm deep still reaches 25 Hz. At 55 kg it is less than a third of the flagship's weight, but the construction does not change: 62 mm phenolic laminate with constrained-layer elastomer, Panzerholz where the metal would be, veneer laid by the same fourth-generation hand.

## See it to scale

This catalogue draws cabinets at their real size side by side, which no text version can reproduce. Compare the Lorenzo Audio LM3 against another speaker at https://truescaleaudio.com/en/compare?a=lorenzo-audio-lm3