# Lorenzo Audio LM2

Floorstanding passive loudspeaker, made by Lorenzo Audio (🇪🇸 ES).

Source: https://truescaleaudio.com/en/speaker/lorenzo-audio-lm2
Manufacturer page: https://lorenzoaudio.com/lm2/

## Dimensions

| Dimension | Metric | Imperial |
| --- | --- | --- |
| Height | 1400 mm | 55.1 in |
| Width | 555 mm | 21.9 in |
| Depth | 625 mm | 24.6 in |
| Weight (each) | 140 kg | 309 lb |

## Drivers

- 1 × 406 mm (16 in) woofer — paper cone, 16-inch, in a double rear-vented chamber
- 1 × 51 mm (2 in) midrange — compression driver, 2-inch mid/mid-high, sealed chamber
- 1 × tweeter — compression driver, Lorenzo lists tweeter and supertweeter as one item and gives no size

## Specifications

| Specification | Value |
| --- | --- |
| Type | Floorstanding |
| Power | Passive |
| Enclosure | Bass reflex, rear port |
| Frequency response | 20–35000 Hz |
| Sensitivity | 95 dB |
| Impedance | 8 Ω nominal |
| Recommended amplifier | 20–500 W |

## About

The LM1's footprint with 32 cm taken off the top: same 555 by 625 mm base, same 16-inch paper woofer in its double rear-vented chamber, but three ways instead of four — a 2-inch compression driver covers mid and mid-high where the flagship splits the job between an 11-inch cone and a 1-inch throat. It reaches the same quoted 20 Hz to 35 kHz and gives up one decibel, 95 against 96. Lorenzo positions it for smaller rooms, which is relative: 1.4 m tall and 140 kg a side. Cabinet, Panzerholz driver mounts, hand-turned wooden ports and hand-soldered crossover are all the flagship's.

## See it to scale

This catalogue draws cabinets at their real size side by side, which no text version can reproduce. Compare the Lorenzo Audio LM2 against another speaker at https://truescaleaudio.com/en/compare?a=lorenzo-audio-lm2