TrueScaleAudio

Compare speakers at true scale

Pick two speakers and see them side by side at their real-world size.

Speaker A
Speaker B
References

Front view — side by side at true scale

ASonus Faber Electa Amator IIIBSonus Faber Guarneri G5
Sonus Faber Electa Amator III front view
Sonus Faber Guarneri G5 front view

Click either cabinet to swap A ↔ B · Reference height: 377 mm (37.7 cm) · 1 mm = 1.49 px

Sonus Faber Electa Amator IIIvsSonus Faber Guarneri G5

The Sonus Faber Electa Amator III and the Sonus Faber Guarneri G5 stand at nearly the same height, around 37.5 cm tall. At 88 dB against 86 dB, the Sonus Faber Electa Amator III is the easier load to drive and plays louder from the same amplifier. Low frequencies come from a 180 mm cone on the Sonus Faber Electa Amator III and a 150 mm cone on the Sonus Faber Guarneri G5. On price, the Sonus Faber Guarneri G5 sits higher — about $19,000 a pair against $10,000 for the Sonus Faber Electa Amator III.

Specifications

AB
ManufacturerSonus FaberSonus Faber
ModelElecta Amator III IIIGuarneri G5 G5
HiFi ladder position#124 of 215 bookshelf#126 of 215 bookshelf
Height375 mm377 mm
Width226 mm230 mm
Depth360 mm375 mm
Weight12.5 kg16 kg
Enclosurebass-reflex-rearbass-reflex-rear
Drivers1× 28 mm tweeter (H28 soft dome with DAD), 1× 180 mm mid-bass (MW18 paper cone)1× 28 mm tweeter (Extended Range soft dome), 1× 150 mm mid-bass (paper cone)
Frequency — low40 Hz40 Hz
Frequency — high35000 Hz35000 Hz
Sensitivity88 dB86 dB
Impedance4 Ω4 Ω
Recommended amp35–125 W30–125 W
MAP (USD)$10,000 / pair$19,000 / pair
Where to buyCheck availabilityCheck availability
Brand websitesonusfaber.comsonusfaber.com
Product pageOpen product pageOpen product page

Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.