TrueScaleAudio
Compare speakers at true scale
Pick two speakers and see them side by side at their real-world size.
Front view — overlaid at true scale
Click either cabinet to swap A ↔ B · Reference height: 305 mm (30.5 cm) · 1 mm = 1.84 px
Castle Richmond IVvsDynaudio Emit 10
The Castle Richmond IV stands 30.5 cm tall — about 1.5 cm more than the Dynaudio Emit 10 at 29.0 cm. On footprint the Castle Richmond IV is the wider cabinet (19.0 cm versus 17.0 cm). At 87 dB against 86 dB, the Castle Richmond IV is the easier load to drive and plays louder from the same amplifier. The Castle Richmond IV reaches deeper in the bass, down to 58 Hz versus 64 Hz. Low frequencies come from a 150 mm cone on the Castle Richmond IV and a 140 mm cone on the Dynaudio Emit 10. Both land in a similar price bracket, around $780 a pair.
| A | B | |
|---|---|---|
| Manufacturer | Castle | Dynaudio |
| Model | Castle Richmond IV | Dynaudio Emit 10 |
| Height | 305 mm | 290 mm |
| Width | 190 mm | 170 mm |
| Depth | 262 mm | 285 mm |
| Weight | 6.3 kg | 6.4 kg |
| Enclosure | bass-reflex-rear | bass-reflex-rear |
| Drivers | 1× 150 mm mid-bass, 1× 32 mm tweeter (soft dome) | 1× 28 mm tweeter (Cerotar soft dome with Hexis), 1× 140 mm mid-bass (MSP cone) |
| Frequency — low | 58 Hz | 64 Hz |
| Frequency — high | 22000 Hz | 25000 Hz |
| Sensitivity | 87 dB | 86 dB |
| Impedance | 8 Ω | 6 Ω |
| Recommended amp | 25–100 W | — |
| MAP (USD) | $760 / pair | $799 / pair |
| Where to buy | Check availability ↗ | Check availability ↗ |
| Brand website | castle.uk.com ↗ | dynaudio.com ↗ |
| Product page | Open product page ↗ | Open product page ↗ |
Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.