TrueScaleAudio
Compare speakers at true scale
Pick two speakers and see them side by side at their real-world size.
Front view — side by side at true scale
Click either cabinet to swap A ↔ B · Reference height: 12.4 in · 1 in = 45.16 px
Dynaudio Evoke 10vsSonus Faber Lumina II
The Dynaudio Evoke 10 stands 31.5 cm tall — about 1.1 cm more than the Sonus Faber Lumina II at 30.4 cm. At 86 dB against 84 dB, the Sonus Faber Lumina II is the easier load to drive and plays louder from the same amplifier. The Dynaudio Evoke 10 reaches deeper in the bass, down to 47 Hz versus 55 Hz. Low frequencies come from a 140 mm cone on the Dynaudio Evoke 10 and a 150 mm cone on the Sonus Faber Lumina II. Both land in a similar price bracket, around $1,599 a pair.
| A | B | |
|---|---|---|
| Manufacturer | Dynaudio | Sonus Faber |
| Model | Evoke 10 | Lumina II |
| HiFi ladder position | #58 of 215 bookshelf | #46 of 215 bookshelf |
| Height | 12.4 in | 12 in |
| Width | 7.1 in | 7 in |
| Depth | 10.9 in | 10.4 in |
| Weight | 14.8 lb | 12.8 lb |
| Enclosure | bass-reflex-rear | bass-reflex-front |
| Drivers | 1× 1.1 in tweeter (Cerotar soft dome with Hexis), 1× 5.5 in mid-bass (MSP cone) | 1× 1.1 in tweeter (DAD soft dome), 1× 5.9 in mid-bass (paper cone) |
| Frequency — low | 47 Hz | 55 Hz |
| Frequency — high | 23000 Hz | 24000 Hz |
| Sensitivity | 84 dB | 86 dB |
| Impedance | 6 Ω | 4 Ω |
| Recommended amp | — | 30–150 W |
| MAP (USD) | $1,699 / pair | $1,499 / pair |
| Where to buy | Check availability ↗ | Check availability ↗ |
| Brand website | dynaudio.com ↗ | sonusfaber.com ↗ |
| Product page | Open product page ↗ | Open product page ↗ |
Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.