TrueScaleAudio
Compare speakers at true scale
Pick two speakers and see them side by side at their real-world size.
Front view — side by side at true scale
Click either cabinet to swap A ↔ B · Reference height: 315 mm (31.5 cm) · 1 mm = 1.78 px
Dynaudio Evoke 10vsRevel M145
The Dynaudio Evoke 10 stands 31.5 cm tall — about 2.1 cm more than the Revel M145 at 29.4 cm. On footprint the Revel M145 is the wider cabinet (20.0 cm versus 18.0 cm). At 85 dB against 84 dB, the Revel M145 is the easier load to drive and plays louder from the same amplifier. The Dynaudio Evoke 10 reaches deeper in the bass, down to 47 Hz versus 54 Hz. Low frequencies come from a 140 mm cone on the Dynaudio Evoke 10 and a 130 mm cone on the Revel M145. On price, the Revel M145 sits higher — about $1,999 a pair against $1,699 for the Dynaudio Evoke 10.
| A | B | |
|---|---|---|
| Manufacturer | Dynaudio | Revel |
| Model | Dynaudio Evoke 10 | Revel M145 |
| Height | 315 mm | 294 mm |
| Width | 180 mm | 200 mm |
| Depth | 277 mm | 245 mm |
| Weight | 6.7 kg | 6.8 kg |
| Enclosure | bass-reflex-rear | bass-reflex-rear |
| Drivers | 1× 28 mm tweeter (Cerotar soft dome with Hexis), 1× 140 mm mid-bass (MSP cone) | 1× 130 mm mid-bass (Micro Ceramic Composite (MCC) cone), 1× 25 mm tweeter (ceramic composite (DCC) dome) |
| Frequency — low | 47 Hz | 54 Hz |
| Frequency — high | 23000 Hz | 40000 Hz |
| Sensitivity | 84 dB | 85 dB |
| Impedance | 6 Ω | 6 Ω |
| Recommended amp | — | 15–150 W |
| MAP (USD) | $1,699 / pair | $1,999 / pair |
| Where to buy | Check availability ↗ | Check availability ↗ |
| Brand website | dynaudio.com ↗ | revelspeakers.com ↗ |
| Product page | Open product page ↗ | Open product page ↗ |
Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.