TrueScaleAudio
Compare speakers at true scale
Pick two speakers and see them side by side at their real-world size.
Front view — side by side at true scale
Click either cabinet to swap A ↔ B · Reference height: 1503 mm (150.3 cm) · 1 mm = 0.37 px
Klipsch RF-7 IIIvsMartinLogan ElectroMotion ESL X
The MartinLogan ElectroMotion ESL X stands 150.3 cm tall — about 25.8 cm more than the Klipsch RF-7 III at 124.5 cm. On footprint the Klipsch RF-7 III is the wider cabinet (36.2 cm versus 23.9 cm). At 100 dB against 91 dB, the Klipsch RF-7 III is the easier load to drive and plays louder from the same amplifier. The Klipsch RF-7 III reaches deeper in the bass, down to 32 Hz versus 41 Hz. Low frequencies come from a 254 mm cone on the Klipsch RF-7 III and a 203 mm cone on the MartinLogan ElectroMotion ESL X. On price, the Klipsch RF-7 III sits higher — about $4,998 a pair against $4,000 for the MartinLogan ElectroMotion ESL X.
| A | B | |
|---|---|---|
| Manufacturer | Klipsch | MartinLogan |
| Model | Klipsch RF-7 III III | MartinLogan ElectroMotion ESL X |
| Height | 1245 mm | 1503 mm |
| Width | 362 mm | 239 mm |
| Depth | 454 mm | 526 mm |
| Weight | 44.1 kg | 23.6 kg |
| Enclosure | bass-reflex-rear | bass-reflex-rear |
| Drivers | 1× 44 mm tweeter (titanium compression diaphragm), 2× 254 mm woofer (Cerametallic cone) | 1× midrange (electrostatic (XStat CLS)), 2× 203 mm woofer (paper cone) |
| Frequency — low | 32 Hz | 41 Hz |
| Frequency — high | 25000 Hz | 22000 Hz |
| Sensitivity | 100 dB | 91 dB |
| Impedance | 8 Ω | 6 Ω |
| Recommended amp | — | 20–400 W |
| MAP (USD) | $4,998 / pair | $4,000 / pair |
| Where to buy | Check availability ↗ | Check availability ↗ |
| Brand website | klipsch.com ↗ | martinlogan.com ↗ |
| Product page | Open product page ↗ | Open product page ↗ |
Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.