Klipsch · Reference · Floorstander

RF-7 III

$4,998 / pairCheck on Amazon ↗
Product description
The flagship of Klipsch's Reference line, hand-assembled in Hope, Arkansas — a two-way horn-loaded floorstander with a 1.75-inch titanium compression driver in a 90-by-90-degree Tractrix horn over twin 10-inch Cerametallic woofers. Dual rear ports, 100 dB sensitivity and 1000 W peak make it a high-output, dynamic tower for larger rooms and home theatre.

Performance — where it sits in the catalog

BassTrebleSensitivityEasy loadCone area
Bass reachTreble reachSensitivityEasy loadCone area
RF-7 III32 Hz25 kHz100 dB8 Ω1029 cm²
Median32 Hz30 kHz90 dB6 Ω654 cm²
How to read this chart

Each axis spans the range the 648 floorstanders in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of this speaker's own class, the 600 passive floorstanders — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.

Units
TypeFloorstander
HiFi ladder position#491 of 648 floorstander
PowerPassive
Height1245 mm
Width362 mm
Depth454 mm
Footprint1643 cm²
Space taken204.6 L
Weight44.1 kg
EnclosureBass reflex, rear port
Drivers1× 44 mm tweeter (titanium compression diaphragm), 2× 254 mm woofer (Cerametallic cone)
Crossover frequency1300 Hz
Frequency response32–25000 Hz (±3 dB)
Sensitivity100 dB
Impedance8 Ω
Power handling250 W
MAP (USD)$4,998 / pair
Where to buyCheck on Amazon ↗
Manufacturerklipsch.com ↗
Product pageOpen product page ↗

Suggested TrueScale comparisons

Tap any speaker to see it beside this one at true, real-world scale.