TrueScaleAudio
Compare speakers at true scale
Pick two speakers and see them side by side at their real-world size.
Front view — side by side at true scale
Click either cabinet to swap A ↔ B · Reference height: 1138 mm (113.8 cm) · 1 mm = 0.49 px
Sonus Faber Sonetto V G2vsBowers & Wilkins 702 S3
The Bowers & Wilkins 702 S3 stands 113.8 cm tall — about 5.0 cm more than the Sonus Faber Sonetto V G2 at 108.8 cm. On footprint the Sonus Faber Sonetto V G2 is the wider cabinet (30.9 cm versus 28.9 cm). At 90 dB against 89 dB, the Bowers & Wilkins 702 S3 is the easier load to drive and plays louder from the same amplifier. The Sonus Faber Sonetto V G2 reaches deeper in the bass, down to 35 Hz versus 46 Hz. The Sonus Faber Sonetto V G2 is down-firing ported and the Bowers & Wilkins 702 S3 is rear-ported. Both land in a similar price bracket, around $6,750 a pair.
| A | B | |
|---|---|---|
| Manufacturer | Sonus Faber | Bowers & Wilkins |
| Model | Sonetto V G2 G2 | 702 S3 S3 |
| HiFi ladder position | #117 of 281 floorstander | #167 of 281 floorstander |
| Height | 1088 mm | 1138 mm |
| Width | 309 mm | 289 mm |
| Depth | 415 mm | 410 mm |
| Weight | 33.4 kg | 33.46 kg |
| Enclosure | bass-reflex-down | bass-reflex-rear |
| Drivers | 1× 28 mm tweeter (DAD Arrow Point soft dome), 1× 165 mm midrange (Camelia paper cone), 2× 165 mm woofer (paper cone) | 1× 25 mm tweeter (Carbon Dome), 1× 150 mm midrange (Continuum cone FST), 3× 165 mm woofer (Aerofoil bass cone) |
| Frequency — low | 35 Hz | 46 Hz |
| Frequency — high | 40000 Hz | 28000 Hz |
| Sensitivity | 89 dB | 90 dB |
| Impedance | 4 Ω | 8 Ω |
| Recommended amp | 50–320 W | 30–300 W |
| MAP (USD) | $6,499 / pair | $7,000 / pair |
| Where to buy | Check availability ↗ | Check availability ↗ |
| Brand website | sonusfaber.com ↗ | bowerswilkins.com ↗ |
| Product page | Open product page ↗ | Open product page ↗ |
Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.