Heco · Aurora · Bookshelf

Aurora 200 P

Product description
Heco's smallest cabinet with the amplifier built in — 2 × 35 W of Class D in the right-hand speaker, feeding itself and a passive twin over a speaker cable. The drive units are the range's own, a 125 mm kraft-paper mid-bass and the 28 mm Fluktus silk dome, crossed at 3.4 kHz. What sets it apart from most powered bookshelves at the price is the input list: an MM phono stage with its own earth post alongside line RCA, a 3.5 mm jack, optical, HDMI ARC so a television's remote controls the volume, Bluetooth 5.0 with aptX, and a subwoofer output. Tone controls for treble and bass with a reset to flat, on the remote. The active cabinet is 5.8 kg and 258 mm deep; the passive one 5.2 kg and 245 mm.
Units
TypeBookshelf
HiFi ladder position#108 of 446 bookshelf
PowerActive
Height308 mm
Width170 mm
Depth258 mm
Weight5.8 kg
EnclosureBass reflex, rear port
Drivers1× 28 mm tweeter (silk-compound dome), 1× 125 mm mid-bass (long-fibre kraft-paper cone)
Crossover frequency3400 Hz
Frequency response38–40000 Hz
MAP (USD)$699 / pair
Amplification (per driver)—
Total amp power70 W
Max SPL @ 1 m—
Hi-res audio—
Wired inputsRCA Phono, RCA, Optical (Toslink), HDMI ARC
Streaming / wirelessBluetooth
OutputsRCA sub-out
Room correction—
Primary + secondary pairYes
Wireless inter-speaker linkNo
Latency—
Idle power—
Max consumption—
Where to buyCheck availability ↗
Manufacturerheco-audio.de ↗
Product pageOpen product page ↗

Suggested TrueScale comparisons

Tap any speaker to see it beside this one at true, real-world scale.