TrueScaleAudio

Compare speakers at true scale

Pick two speakers and see them side by side at their real-world size.

Speaker A

Stands apply to bookshelves only

Speaker B

Stands apply to bookshelves only

References

Front view — side by side at true scale

ADali Epicon 8BKEF Q11 Meta
Dali Epicon 8 front view
KEF Q11 Meta front view

Click either cabinet to swap A ↔ B · Reference height: 1225 mm (122.5 cm) · 1 mm = 0.46 px

Plan view — footprint at true scale

front wall
A1280 cm²264 mm485 mm
B1197 cm²315 mm380 mm
0 mm100 mm30 mm

A shelf applies to bookshelf speakers only — one of these stands on the floor.

Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.

Performance — where each one sits in the catalog

BassTrebleSensitivityEasy loadCone area
Bass reachTreble reachSensitivityEasy loadCone area
Epicon 835 Hz30 kHz89 dB5 Ω873 cm²
Q11 Meta44 Hz20 kHz89 dB4 Ω723 cm²
Median32 Hz30 kHz90 dB6 Ω654 cm²
How to read this chart

Each axis spans the range the 648 floorstanders in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 600 passive floorstanders — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.

Dali Epicon 8vsKEF Q11 Meta

The Dali Epicon 8 stands 122.5 cm tall — about 11.3 cm more than the KEF Q11 Meta at 111.2 cm. On footprint the KEF Q11 Meta is the wider cabinet (31.5 cm versus 26.4 cm). The Dali Epicon 8 reaches deeper in the bass, down to 35 Hz versus 44 Hz. Low frequencies come from a 200 mm cone on the Dali Epicon 8 and a 165 mm cone on the KEF Q11 Meta. On price, the Dali Epicon 8 sits higher — about $23,000 a pair against $2,999 for the KEF Q11 Meta.

Specifications

AB
ManufacturerDaliKEF
ModelEpicon 8Q11 Meta
HiFi ladder position#475 of 648 floorstander#335 of 648 floorstander
Height1225 mm1112 mm
Width264 mm315 mm
Depth485 mm380 mm
Footprint1280 cm²1197 cm²
Space taken156.8 L133.1 L
Weight47.5 kg22.5 kg
Enclosurebass-reflex-rearbass-reflex-rear
Drivers1× 55 mm super-tweeter (planar ribbon), 1× 29 mm tweeter (soft dome), 1× 165 mm midrange (wood-fibre cone, SMC motor), 2× 200 mm woofer (wood-fibre cone, SMC motor)1× 19 mm tweeter (MAT aluminium dome), 1× 100 mm midrange (aluminium cone), 3× 165 mm woofer (hybrid aluminium cone)
Crossover frequency550 / 3100 / 15000 Hz480 / 2700 Hz
Frequency — low35 Hz44 Hz
Frequency — high30000 Hz20000 Hz
Sensitivity89 dB89 dB
Impedance5 Ω4 Ω
Recommended amp50–500 W15–225 W
MAP (USD)$23,000 / pair$2,999 / pair
Where to buyCheck availability ↗Check on Amazon ↗
Brand websitedali-speakers.com ↗international.kef.com ↗
Product pageOpen product page ↗Open product page ↗

Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.