TrueScaleAudio
Compare speakers at true scale
Pick two speakers and see them side by side at their real-world size.
Front view — side by side at true scale
Plan view — footprint at true scale
A shelf applies to bookshelf speakers only — one of these stands on the floor.
Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.
Performance — where each one sits in the catalog
| Bass reach | Treble reach | Sensitivity | Easy load | Cone area | |
|---|---|---|---|---|---|
| Epicon 8 | 35 Hz | 30 kHz | 89 dB | 5 Ω | 873 cm² |
| RP-6000F II | 38 Hz | 25 kHz | 96 dB | 8 Ω | 433 cm² |
| Median | 32 Hz | 30 kHz | 90 dB | 6 Ω | 654 cm² |
How to read this chart
Each axis spans the range the 648 floorstanders in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 600 passive floorstanders — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.
Dali Epicon 8vsKlipsch RP-6000F II
The Dali Epicon 8 stands 122.5 cm tall — about 21.9 cm more than the Klipsch RP-6000F II at 100.6 cm. On footprint the Dali Epicon 8 is the wider cabinet (26.4 cm versus 24.1 cm). At 96 dB against 89 dB, the Klipsch RP-6000F II is the easier load to drive and plays louder from the same amplifier. The Dali Epicon 8 reaches deeper in the bass, down to 35 Hz versus 38 Hz. Low frequencies come from a 200 mm cone on the Dali Epicon 8 and a 165 mm cone on the Klipsch RP-6000F II. On price, the Dali Epicon 8 sits higher — about $23,000 a pair against $449 for the Klipsch RP-6000F II.
| A | B | |
|---|---|---|
| Manufacturer | Dali | Klipsch |
| Model | Epicon 8 | RP-6000F II |
| HiFi ladder position | #475 of 648 floorstander | #157 of 648 floorstander |
| Height | 1225 mm | 1006 mm |
| Width | 264 mm | 241 mm |
| Depth | 485 mm | 446 mm |
| Footprint | 1280 cm² | 1075 cm² |
| Space taken | 156.8 L | 108.1 L |
| Weight | 47.5 kg | 22.4 kg |
| Enclosure | bass-reflex-rear | bass-reflex-rear |
| Drivers | 1× 55 mm super-tweeter (planar ribbon), 1× 29 mm tweeter (soft dome), 1× 165 mm midrange (wood-fibre cone, SMC motor), 2× 200 mm woofer (wood-fibre cone, SMC motor) | 1× 25 mm tweeter (titanium LTS dome), 2× 165 mm woofer (Cerametallic cone) |
| Crossover frequency | 550 / 3100 / 15000 Hz | 1770 Hz |
| Frequency — low | 35 Hz | 38 Hz |
| Frequency — high | 30000 Hz | 25000 Hz |
| Sensitivity | 89 dB | 96 dB |
| Impedance | 5 Ω | 8 Ω |
| Recommended amp | 50–500 W | — |
| MAP (USD) | $23,000 / pair | $449 each |
| Where to buy | Check availability ↗ | Check on Amazon ↗ |
| Brand website | dali-speakers.com ↗ | klipsch.com ↗ |
| Product page | Open product page ↗ | Open product page ↗ |
Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.
