TrueScaleAudio

Compare speakers at true scale

Pick two speakers and see them side by side at their real-world size.

Speaker A
Speaker B
References

Front view — side by side at true scale

ADali Rubicon 2BSonus Faber Lumina II
Dali Rubicon 2 front view
Sonus Faber Lumina II front view

Click either cabinet to swap A ↔ B · Reference height: 353 mm (35.3 cm) · 1 mm = 1.59 px

Plan view — footprint at true scale

front wall
A653 cm²195 mm335 mm
B471 cm²179 mm263 mm
0 mm100 mm30 mm
150 mm500 mm300 mm

Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.

Performance — where each one sits in the catalog

BassTrebleSensitivityEasy loadCone area
Bass reachTreble reachSensitivityEasy loadCone area
Rubicon 250 Hz26 kHz87 dB4 Ω220 cm²
Lumina II55 Hz24 kHz86 dB4 Ω183 cm²
Median45 Hz25 kHz87 dB6 Ω219 cm²
How to read this chart

Each axis spans the range the 470 bookshelves in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 385 passive bookshelves — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.

Dali Rubicon 2vsSonus Faber Lumina II

The Dali Rubicon 2 stands 35.3 cm tall — about 4.9 cm more than the Sonus Faber Lumina II at 30.4 cm. On footprint the Dali Rubicon 2 is the wider cabinet (19.5 cm versus 17.9 cm). At 87 dB against 86 dB, the Dali Rubicon 2 is the easier load to drive and plays louder from the same amplifier. The Dali Rubicon 2 reaches deeper in the bass, down to 50 Hz versus 55 Hz. Low frequencies come from a 165 mm cone on the Dali Rubicon 2 and a 150 mm cone on the Sonus Faber Lumina II. On price, the Dali Rubicon 2 sits higher — about $2,999 a pair against $1,499 for the Sonus Faber Lumina II.

Specifications

AB
ManufacturerDaliSonus Faber
ModelRubicon 2Lumina II
HiFi ladder position#214 of 470 bookshelf#103 of 470 bookshelf
Height353 mm304 mm
Width195 mm179 mm
Depth335 mm263 mm
Footprint653 cm²471 cm²
Space taken23.1 L14.3 L
Weight8 kg5.8 kg
Enclosurebass-reflex-rearbass-reflex-front
Drivers1× 29 mm tweeter (soft dome), 1× 165 mm mid-bass (wood-fibre cone)1× 29 mm tweeter (DAD soft dome), 1× 150 mm mid-bass (paper cone)
Crossover frequency3100 Hz1800 Hz
Frequency — low50 Hz55 Hz
Frequency — high26000 Hz24000 Hz
Sensitivity87 dB86 dB
Impedance4 Ω4 Ω
Recommended amp40–150 W30–150 W
MAP (USD)$2,999 / pair$1,499 / pair
Where to buyCheck availability ↗Check availability ↗
Brand websitedali-speakers.com ↗sonusfaber.com ↗
Product pageOpen product page ↗Open product page ↗

Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.