TrueScaleAudio

Compare speakers at true scale

Pick two speakers and see them side by side at their real-world size.

Speaker A

Stands apply to bookshelves only

Speaker B

Stands apply to bookshelves only

References

Front view — side by side at true scale

ADynaudio Confidence 50BKEF R5 Meta
Dynaudio Confidence 50 front view
KEF R5 Meta front view

Click either cabinet to swap A ↔ B · Reference height: 1557 mm (155.7 cm) · 1 mm = 0.36 px

Plan view — footprint at true scale

front wall
A1543 cm²364 mm424 mm
B925 cm²269 mm344 mm
0 mm100 mm30 mm

A shelf applies to bookshelf speakers only — one of these stands on the floor.

Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.

Performance — where each one sits in the catalog

BassTrebleSensitivityEasy loadCone area
Bass reachTreble reachSensitivityEasy loadCone area
Confidence 5035 Hz22 kHz87 dB4 Ω869 cm²
R5 Meta52 Hz28 kHz87 dB4 Ω393 cm²
Median32 Hz30 kHz90 dB6 Ω654 cm²
How to read this chart

Each axis spans the range the 648 floorstanders in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 600 passive floorstanders — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.

Dynaudio Confidence 50vsKEF R5 Meta

The Dynaudio Confidence 50 stands 155.7 cm tall — about 48.5 cm more than the KEF R5 Meta at 107.2 cm. On footprint the Dynaudio Confidence 50 is the wider cabinet (36.4 cm versus 26.9 cm). The Dynaudio Confidence 50 reaches deeper in the bass, down to 35 Hz versus 52 Hz. Low frequencies come from a 180 mm cone on the Dynaudio Confidence 50 and a 130 mm cone on the KEF R5 Meta. On price, the Dynaudio Confidence 50 sits higher — about $30,000 a pair against $5,999 for the KEF R5 Meta.

Specifications

AB
ManufacturerDynaudioKEF
ModelConfidence 50R5 Meta
HiFi ladder position#597 of 648 floorstander#262 of 648 floorstander
Height1557 mm1072 mm
Width364 mm269 mm
Depth424 mm344 mm
Footprint1543 cm²925 cm²
Space taken240.3 L99.2 L
Weight49.6 kg24.5 kg
Enclosurebass-reflex-downbass-reflex-rear
Drivers1× 28 mm tweeter (Esotar 3 soft dome with DDC Lens), 2× 150 mm midrange (MSP with Horizon Surround), 2× 180 mm woofer (NeoTec MSP cone)1× 25 mm tweeter (MAT aluminium dome), 1× 125 mm midrange (aluminium cone), 2× 130 mm woofer (hybrid aluminium cone)
Crossover frequency200 / 2860 Hz400 / 2700 Hz
Frequency — low35 Hz52 Hz
Frequency — high22000 Hz28000 Hz
Sensitivity87 dB87 dB
Impedance4 Ω4 Ω
Recommended amp—15–200 W
MAP (USD)$30,000 / pair$5,999 / pair
Where to buyCheck availability ↗Check on Amazon ↗
Brand websitedynaudio.com ↗international.kef.com ↗
Product pageOpen product page ↗Open product page ↗

Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.