TrueScaleAudio

Compare speakers at true scale

Pick two speakers and see them side by side at their real-world size.

Speaker A
Speaker B
References

Front view — side by side at true scale

ADynaudio Special FortyBKEF R3 Meta
Dynaudio Special Forty front view
KEF R3 Meta front view

Click either cabinet to swap A ↔ B · Reference height: 422 mm (42.2 cm) · 1 mm = 1.33 px

Plan view — footprint at true scale

front wall
A638 cm²198 mm322 mm
B672 cm²200 mm336 mm
0 mm100 mm30 mm
150 mm500 mm300 mm

Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.

Performance — where each one sits in the catalog

BassTrebleSensitivityEasy loadCone area
Bass reachTreble reachSensitivityEasy loadCone area
Special Forty41 Hz23 kHz86 dB6 Ω233 cm²
R3 Meta58 Hz28 kHz87 dB4 Ω341 cm²
Median45 Hz25 kHz87 dB6 Ω219 cm²
How to read this chart

Each axis spans the range the 470 bookshelves in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 385 passive bookshelves — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.

Dynaudio Special FortyvsKEF R3 Meta

The KEF R3 Meta stands 42.2 cm tall — about 6.2 cm more than the Dynaudio Special Forty at 36.0 cm. At 87 dB against 86 dB, the KEF R3 Meta is the easier load to drive and plays louder from the same amplifier. The Dynaudio Special Forty reaches deeper in the bass, down to 41 Hz versus 58 Hz. On price, the Dynaudio Special Forty sits higher — about $3,500 a pair against $2,999 for the KEF R3 Meta.

Specifications

AB
ManufacturerDynaudioKEF
ModelSpecial FortyR3 Meta
HiFi ladder position#235 of 470 bookshelf#353 of 470 bookshelf
Height360 mm422 mm
Width198 mm200 mm
Depth322 mm336 mm
Footprint638 cm²672 cm²
Space taken23 L28.4 L
Weight8.1 kg12.4 kg
Enclosurebass-reflex-rearbass-reflex-rear
Drivers1× 28 mm tweeter (Esotar Forty soft dome), 1× 170 mm mid-bass (MSP cone)1× 25 mm tweeter (MAT aluminium dome), 1× 125 mm midrange (aluminium cone), 1× 165 mm woofer (hybrid aluminium cone)
Crossover frequency2000 Hz420 / 2300 Hz
Frequency — low41 Hz58 Hz
Frequency — high23000 Hz28000 Hz
Sensitivity86 dB87 dB
Impedance6 Ω4 Ω
Recommended amp—15–180 W
MAP (USD)$3,500 / pair$2,999 / pair
Where to buyCheck availability ↗Check on Amazon ↗
Brand websitedynaudio.com ↗international.kef.com ↗
Product pageOpen product page ↗Open product page ↗

Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.