TrueScaleAudio

Compare speakers at true scale

Pick two speakers and see them side by side at their real-world size.

Speaker A
Speaker B
References

Front view — side by side at true scale

ADynaudio Special FortyBKlipsch RP-500M II
Dynaudio Special Forty front view
Klipsch RP-500M II front view

Click either cabinet to swap A ↔ B · Reference height: 360 mm (36.0 cm) · 1 mm = 1.56 px

Plan view — footprint at true scale

front wall
A638 cm²198 mm322 mm
B462 cm²171 mm270 mm
0 mm100 mm30 mm
150 mm500 mm300 mm

Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.

Performance — where each one sits in the catalog

BassTrebleSensitivityEasy loadCone area
Bass reachTreble reachSensitivityEasy loadCone area
Special Forty41 Hz23 kHz86 dB6 Ω233 cm²
RP-500M II50 Hz25 kHz92 dB8 Ω144 cm²
Median45 Hz25 kHz87 dB6 Ω219 cm²
How to read this chart

Each axis spans the range the 470 bookshelves in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 385 passive bookshelves — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.

Dynaudio Special FortyvsKlipsch RP-500M II

The Dynaudio Special Forty stands 36.0 cm tall — about 1.6 cm more than the Klipsch RP-500M II at 34.4 cm. On footprint the Dynaudio Special Forty is the wider cabinet (19.8 cm versus 17.1 cm). At 92 dB against 86 dB, the Klipsch RP-500M II is the easier load to drive and plays louder from the same amplifier. The Dynaudio Special Forty reaches deeper in the bass, down to 41 Hz versus 50 Hz. Low frequencies come from a 170 mm cone on the Dynaudio Special Forty and a 133 mm cone on the Klipsch RP-500M II. On price, the Dynaudio Special Forty sits higher — about $3,500 a pair against $549 for the Klipsch RP-500M II.

Specifications

AB
ManufacturerDynaudioKlipsch
ModelSpecial FortyRP-500M II
HiFi ladder position#235 of 470 bookshelf#193 of 470 bookshelf
Height360 mm344 mm
Width198 mm171 mm
Depth322 mm270 mm
Footprint638 cm²462 cm²
Space taken23 L15.9 L
Weight8.1 kg5.95 kg
Enclosurebass-reflex-rearbass-reflex-rear
Drivers1× 28 mm tweeter (Esotar Forty soft dome), 1× 170 mm mid-bass (MSP cone)1× 25 mm tweeter (titanium LTS dome), 1× 133 mm mid-bass (Cerametallic cone)
Crossover frequency2000 Hz1530 Hz
Frequency — low41 Hz50 Hz
Frequency — high23000 Hz25000 Hz
Sensitivity86 dB92 dB
Impedance6 Ω8 Ω
Recommended amp——
MAP (USD)$3,500 / pair$549 / pair
Where to buyCheck availability ↗Check on Amazon ↗
Brand websitedynaudio.com ↗klipsch.com ↗
Product pageOpen product page ↗Open product page ↗

Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.