TrueScaleAudio
Compare speakers at true scale
Pick two speakers and see them side by side at their real-world size.
Front view — side by side at true scale
Plan view — footprint at true scale
Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.
Performance — where each one sits in the catalog
| Bass reach | Treble reach | Sensitivity | Easy load | Cone area | |
|---|---|---|---|---|---|
| Special Forty | 41 Hz | 23 kHz | 86 dB | 6 Ω | 233 cm² |
| Reserve R200 | 51 Hz | 38 kHz | 86 dB | 4 Ω | 219 cm² |
| Median | 45 Hz | 25 kHz | 87 dB | 6 Ω | 219 cm² |
How to read this chart
Each axis spans the range the 470 bookshelves in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 385 passive bookshelves — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.
Dynaudio Special FortyvsPolk Reserve R200
The Dynaudio Special Forty and the Polk Reserve R200 stand at nearly the same height, around 36.0 cm tall. The Dynaudio Special Forty reaches deeper in the bass, down to 41 Hz versus 51 Hz. On price, the Dynaudio Special Forty sits higher — about $3,500 a pair against $749 for the Polk Reserve R200.
| A | B | |
|---|---|---|
| Manufacturer | Dynaudio | Polk |
| Model | Special Forty | Reserve R200 |
| HiFi ladder position | #235 of 470 bookshelf | #230 of 470 bookshelf |
| Height | 360 mm | 359 mm |
| Width | 198 mm | 194 mm |
| Depth | 322 mm | 354 mm |
| Footprint | 638 cm² | 687 cm² |
| Space taken | 23 L | 24.7 L |
| Weight | 8.1 kg | 8.7 kg |
| Enclosure | bass-reflex-rear | bass-reflex-rear |
| Drivers | 1× 28 mm tweeter (Esotar Forty soft dome), 1× 170 mm mid-bass (MSP cone) | 1× 25 mm tweeter (Pinnacle ring radiator), 1× 165 mm mid-bass (Turbine cone) |
| Crossover frequency | 2000 Hz | 3000 Hz |
| Frequency — low | 41 Hz | 51 Hz |
| Frequency — high | 23000 Hz | 38000 Hz |
| Sensitivity | 86 dB | 86 dB |
| Impedance | 6 Ω | 4 Ω |
| Recommended amp | — | 30–200 W |
| MAP (USD) | $3,500 / pair | $749 / pair |
| Where to buy | Check availability ↗ | Check on Amazon ↗ |
| Brand website | dynaudio.com ↗ | polkaudio.com ↗ |
| Product page | Open product page ↗ | Open product page ↗ |
Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.

