TrueScaleAudio

Compare speakers at true scale

Pick two speakers and see them side by side at their real-world size.

Speaker A

Stands apply to bookshelves only

Speaker B

Stands apply to bookshelves only

References

Front view — side by side at true scale

AFocal Sopra N°3BKEF R5 Meta
Focal Sopra N°3 front view
KEF R5 Meta front view

Click either cabinet to swap A ↔ B · Reference height: 1264 mm (126.4 cm) · 1 mm = 0.44 px

Plan view — footprint at true scale

front wall
A2112 cm²355 mm595 mm
B925 cm²269 mm344 mm
0 mm100 mm30 mm

A shelf applies to bookshelf speakers only — one of these stands on the floor.

Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.

Performance — where each one sits in the catalog

BassTrebleSensitivityEasy loadCone area
Bass reachTreble reachSensitivityEasy loadCone area
Sopra N°333 Hz40 kHz91.5 dB8 Ω912 cm²
R5 Meta52 Hz28 kHz87 dB4 Ω393 cm²
Median32 Hz30 kHz90 dB6 Ω654 cm²
How to read this chart

Each axis spans the range the 648 floorstanders in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 600 passive floorstanders — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.

Focal Sopra N°3vsKEF R5 Meta

The Focal Sopra N°3 stands 126.4 cm tall — about 19.2 cm more than the KEF R5 Meta at 107.2 cm. On footprint the Focal Sopra N°3 is the wider cabinet (35.5 cm versus 26.9 cm). At 91.5 dB against 87 dB, the Focal Sopra N°3 is the easier load to drive and plays louder from the same amplifier. The Focal Sopra N°3 reaches deeper in the bass, down to 33 Hz versus 52 Hz. Low frequencies come from a 210 mm cone on the Focal Sopra N°3 and a 130 mm cone on the KEF R5 Meta. On price, the Focal Sopra N°3 sits higher — about $22,998 a pair against $5,999 for the KEF R5 Meta.

Specifications

AB
ManufacturerFocalKEF
ModelSopra N°3R5 Meta
HiFi ladder position#507 of 648 floorstander#262 of 648 floorstander
Height1264 mm1072 mm
Width355 mm269 mm
Depth595 mm344 mm
Footprint2112 cm²925 cm²
Space taken267 L99.2 L
Weight70 kg24.5 kg
Enclosurebass-reflex-downbass-reflex-rear
Drivers1× 27 mm tweeter (pure beryllium inverted dome), 1× 165 mm midrange (W sandwich cone), 2× 210 mm woofer (W sandwich cone)1× 25 mm tweeter (MAT aluminium dome), 1× 125 mm midrange (aluminium cone), 2× 130 mm woofer (hybrid aluminium cone)
Crossover frequency250 / 2200 Hz400 / 2700 Hz
Frequency — low33 Hz52 Hz
Frequency — high40000 Hz28000 Hz
Sensitivity91.5 dB87 dB
Impedance8 Ω4 Ω
Recommended amp40–400 W15–200 W
MAP (USD)$22,998 / pair$5,999 / pair
Where to buyCheck availability ↗Check on Amazon ↗
Brand websitefocal.com ↗international.kef.com ↗
Product pageOpen product page ↗Open product page ↗

Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.