TrueScaleAudio

Compare speakers at true scale

Pick two speakers and see them side by side at their real-world size.

Speaker A

Stands apply to bookshelves only

Speaker B

Stands apply to bookshelves only

References

Front view — side by side at true scale

AFocal Sopra N°3BKlipsch RP-6000F II
Focal Sopra N°3 front view
Klipsch RP-6000F II front view

Click either cabinet to swap A ↔ B · Reference height: 1264 mm (126.4 cm) · 1 mm = 0.44 px

Plan view — footprint at true scale

front wall
A2112 cm²355 mm595 mm
B1075 cm²241 mm446 mm
0 mm100 mm30 mm

A shelf applies to bookshelf speakers only — one of these stands on the floor.

Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.

Performance — where each one sits in the catalog

BassTrebleSensitivityEasy loadCone area
Bass reachTreble reachSensitivityEasy loadCone area
Sopra N°333 Hz40 kHz91.5 dB8 Ω912 cm²
RP-6000F II38 Hz25 kHz96 dB8 Ω433 cm²
Median32 Hz30 kHz90 dB6 Ω654 cm²
How to read this chart

Each axis spans the range the 648 floorstanders in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 600 passive floorstanders — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.

Focal Sopra N°3vsKlipsch RP-6000F II

The Focal Sopra N°3 stands 126.4 cm tall — about 25.8 cm more than the Klipsch RP-6000F II at 100.6 cm. On footprint the Focal Sopra N°3 is the wider cabinet (35.5 cm versus 24.1 cm). At 96 dB against 91.5 dB, the Klipsch RP-6000F II is the easier load to drive and plays louder from the same amplifier. The Focal Sopra N°3 reaches deeper in the bass, down to 33 Hz versus 38 Hz. Low frequencies come from a 210 mm cone on the Focal Sopra N°3 and a 165 mm cone on the Klipsch RP-6000F II. On price, the Focal Sopra N°3 sits higher — about $22,998 a pair against $449 for the Klipsch RP-6000F II.

Specifications

AB
ManufacturerFocalKlipsch
ModelSopra N°3RP-6000F II
HiFi ladder position#507 of 648 floorstander#157 of 648 floorstander
Height1264 mm1006 mm
Width355 mm241 mm
Depth595 mm446 mm
Footprint2112 cm²1075 cm²
Space taken267 L108.1 L
Weight70 kg22.4 kg
Enclosurebass-reflex-downbass-reflex-rear
Drivers1× 27 mm tweeter (pure beryllium inverted dome), 1× 165 mm midrange (W sandwich cone), 2× 210 mm woofer (W sandwich cone)1× 25 mm tweeter (titanium LTS dome), 2× 165 mm woofer (Cerametallic cone)
Crossover frequency250 / 2200 Hz1770 Hz
Frequency — low33 Hz38 Hz
Frequency — high40000 Hz25000 Hz
Sensitivity91.5 dB96 dB
Impedance8 Ω8 Ω
Recommended amp40–400 W—
MAP (USD)$22,998 / pair$449 each
Where to buyCheck availability ↗Check on Amazon ↗
Brand websitefocal.com ↗klipsch.com ↗
Product pageOpen product page ↗Open product page ↗

Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.