TrueScaleAudio

Compare speakers at true scale

Pick two speakers and see them side by side at their real-world size.

Speaker A
Speaker B
References

Front view — side by side at true scale

AGenelec 8341ABNeumann KH 120 II
Genelec 8341A front view
Neumann KH 120 II front view

Click either cabinet to swap A ↔ B · Reference height: 370 mm (37.0 cm) · 1 mm = 1.51 px

Plan view — footprint at true scale

front wall
A576 cm²237 mm243 mm
B413 cm²182 mm227 mm
0 mm100 mm30 mm
150 mm500 mm300 mm

Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.

Performance — where each one sits in the catalog

BassTrebleCone area
Bass reachTreble reachCone area
8341A38 Hz37 kHz520 cm²
KH 120 II44 Hz21 kHz138 cm²
Median39 Hz24 kHz332 cm²
How to read this chart

Each axis spans the range the 114 studio monitors in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 96 active studio monitors — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe. Not shown: Sensitivity, Easy load — neither maker publishes a figure. Active speakers quote no sensitivity and no impedance, because with the amplifier inside both describe the electronics rather than the cabinet.

Genelec 8341AvsNeumann KH 120 II

The Genelec 8341A stands 37.0 cm tall — about 8.3 cm more than the Neumann KH 120 II at 28.7 cm. On footprint the Genelec 8341A is the wider cabinet (23.7 cm versus 18.2 cm). The Genelec 8341A reaches deeper in the bass, down to 38 Hz versus 44 Hz. Low frequencies come from a 170 mm cone on the Genelec 8341A and a 130 mm cone on the Neumann KH 120 II. On price, the Genelec 8341A sits higher — about $3,675 a pair against $949 for the Neumann KH 120 II.

Specifications

AB
ManufacturerGenelecNeumann
Model8341AKH 120 II
HiFi ladder position#51 of 114 floorstander#19 of 114 floorstander
Height370 mm287 mm
Width237 mm182 mm
Depth243 mm227 mm
Footprint576 cm²413 cm²
Space taken21.3 L11.9 L
Weight9.8 kg5.4 kg
Enclosurebass-reflex-rearbass-reflex-front
Drivers1× 19 mm tweeter (metal dome), 1× 90 mm midrange (cone), 2× 170 mm woofer (racetrack cone)1× 25 mm tweeter (alloy fabric dome), 1× 130 mm woofer (long-throw composite cone)
Crossover frequency500 / 3000 Hz1700 Hz
Frequency — low38 Hz44 Hz
Frequency — high37000 Hz21000 Hz
Sensitivity——
Impedance——
Recommended amp——
MAP (USD)$3,675 each$949 each
Where to buyCheck availability ↗Check on Amazon ↗
Brand websitegenelec.com ↗neumann.com ↗
Product pageOpen product page ↗Open product page ↗

Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.