TrueScaleAudio

Compare speakers at true scale

Pick two speakers and see them side by side at their real-world size.

Speaker A
Speaker B
References

Front view — side by side at true scale

AKEF LS50 MetaBSonus Faber Lumina I
KEF LS50 Meta front view
Sonus Faber Lumina I front view

Click either cabinet to swap A ↔ B · Reference height: 302 mm (30.2 cm) · 1 mm = 1.85 px

Plan view — footprint at true scale

front wall
A559 cm²199 mm281 mm
B315 cm²148 mm213 mm
0 mm100 mm30 mm
150 mm500 mm300 mm

Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.

Performance — where each one sits in the catalog

BassTrebleSensitivityEasy loadCone area
Bass reachTreble reachSensitivityEasy loadCone area
LS50 Meta79 Hz28 kHz85 dB8 Ω138 cm²
Lumina I65 Hz24 kHz84 dB4 Ω120 cm²
Median45 Hz25 kHz87 dB6 Ω219 cm²
How to read this chart

Each axis spans the range the 470 bookshelves in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 385 passive bookshelves — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.

KEF LS50 MetavsSonus Faber Lumina I

The KEF LS50 Meta stands 30.2 cm tall — about 2.2 cm more than the Sonus Faber Lumina I at 28.0 cm. On footprint the KEF LS50 Meta is the wider cabinet (19.9 cm versus 14.8 cm). At 85 dB against 84 dB, the KEF LS50 Meta is the easier load to drive and plays louder from the same amplifier. The Sonus Faber Lumina I reaches deeper in the bass, down to 65 Hz versus 79 Hz. Low frequencies come from a 130 mm cone on the KEF LS50 Meta and a 120 mm cone on the Sonus Faber Lumina I. On price, the KEF LS50 Meta sits higher — about $1,599 a pair against $999 for the Sonus Faber Lumina I.

Specifications

AB
ManufacturerKEFSonus Faber
ModelLS50 MetaLumina I
HiFi ladder position#100 of 470 bookshelf#56 of 470 bookshelf
Height302 mm280 mm
Width199 mm148 mm
Depth281 mm213 mm
Footprint559 cm²315 cm²
Space taken16.9 L8.8 L
Weight7.8 kg4.4 kg
Enclosurebass-reflex-rearbass-reflex-front
Drivers1× 25 mm tweeter (MAT aluminium dome), 1× 130 mm mid-bass (aluminium cone)1× 29 mm tweeter (DAD soft dome), 1× 120 mm mid-bass (paper cone)
Crossover frequency2100 Hz2000 Hz
Frequency — low79 Hz65 Hz
Frequency — high28000 Hz24000 Hz
Sensitivity85 dB84 dB
Impedance8 Ω4 Ω
Recommended amp40–100 W30–100 W
MAP (USD)$1,599 / pair$999 / pair
Where to buyCheck on Amazon ↗Check availability ↗
Brand websiteinternational.kef.com ↗sonusfaber.com ↗
Product pageOpen product page ↗Open product page ↗

Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.