TrueScaleAudio

Compare speakers at true scale

Pick two speakers and see them side by side at their real-world size.

Speaker A
Speaker B
References

Front view — side by side at true scale

AKEF R3 MetaBKlipsch RP-500M II
KEF R3 Meta front view
Klipsch RP-500M II front view

Click either cabinet to swap A ↔ B · Reference height: 422 mm (42.2 cm) · 1 mm = 1.33 px

Plan view — footprint at true scale

front wall
A672 cm²200 mm336 mm
B462 cm²171 mm270 mm
0 mm100 mm30 mm
150 mm500 mm300 mm

Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.

Performance — where each one sits in the catalog

BassTrebleSensitivityEasy loadCone area
Bass reachTreble reachSensitivityEasy loadCone area
R3 Meta58 Hz28 kHz87 dB4 Ω341 cm²
RP-500M II50 Hz25 kHz92 dB8 Ω144 cm²
Median45 Hz25 kHz87 dB6 Ω219 cm²
How to read this chart

Each axis spans the range the 470 bookshelves in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 385 passive bookshelves — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.

KEF R3 MetavsKlipsch RP-500M II

The KEF R3 Meta stands 42.2 cm tall — about 7.8 cm more than the Klipsch RP-500M II at 34.4 cm. On footprint the KEF R3 Meta is the wider cabinet (20.0 cm versus 17.1 cm). At 92 dB against 87 dB, the Klipsch RP-500M II is the easier load to drive and plays louder from the same amplifier. The Klipsch RP-500M II reaches deeper in the bass, down to 50 Hz versus 58 Hz. Low frequencies come from a 165 mm cone on the KEF R3 Meta and a 133 mm cone on the Klipsch RP-500M II. On price, the KEF R3 Meta sits higher — about $2,999 a pair against $549 for the Klipsch RP-500M II.

Specifications

AB
ManufacturerKEFKlipsch
ModelR3 MetaRP-500M II
HiFi ladder position#353 of 470 bookshelf#193 of 470 bookshelf
Height422 mm344 mm
Width200 mm171 mm
Depth336 mm270 mm
Footprint672 cm²462 cm²
Space taken28.4 L15.9 L
Weight12.4 kg5.95 kg
Enclosurebass-reflex-rearbass-reflex-rear
Drivers1× 25 mm tweeter (MAT aluminium dome), 1× 125 mm midrange (aluminium cone), 1× 165 mm woofer (hybrid aluminium cone)1× 25 mm tweeter (titanium LTS dome), 1× 133 mm mid-bass (Cerametallic cone)
Crossover frequency420 / 2300 Hz1530 Hz
Frequency — low58 Hz50 Hz
Frequency — high28000 Hz25000 Hz
Sensitivity87 dB92 dB
Impedance4 Ω8 Ω
Recommended amp15–180 W—
MAP (USD)$2,999 / pair$549 / pair
Where to buyCheck on Amazon ↗Check on Amazon ↗
Brand websiteinternational.kef.com ↗klipsch.com ↗
Product pageOpen product page ↗Open product page ↗

Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.