TrueScaleAudio
Compare speakers at true scale
Pick two speakers and see them side by side at their real-world size.
Front view — side by side at true scale
Plan view — footprint at true scale
Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.
Performance — where each one sits in the catalog
| Bass reach | Treble reach | Sensitivity | Easy load | Cone area | |
|---|---|---|---|---|---|
| R3 Meta | 58 Hz | 28 kHz | 87 dB | 4 Ω | 341 cm² |
| Reserve R200 | 51 Hz | 38 kHz | 86 dB | 4 Ω | 219 cm² |
| Median | 45 Hz | 25 kHz | 87 dB | 6 Ω | 219 cm² |
How to read this chart
Each axis spans the range the 470 bookshelves in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 385 passive bookshelves — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.
KEF R3 MetavsPolk Reserve R200
The KEF R3 Meta stands 42.2 cm tall — about 6.3 cm more than the Polk Reserve R200 at 35.9 cm. At 87 dB against 86 dB, the KEF R3 Meta is the easier load to drive and plays louder from the same amplifier. The Polk Reserve R200 reaches deeper in the bass, down to 51 Hz versus 58 Hz. On price, the KEF R3 Meta sits higher — about $2,999 a pair against $749 for the Polk Reserve R200.
| A | B | |
|---|---|---|
| Manufacturer | KEF | Polk |
| Model | R3 Meta | Reserve R200 |
| HiFi ladder position | #353 of 470 bookshelf | #230 of 470 bookshelf |
| Height | 422 mm | 359 mm |
| Width | 200 mm | 194 mm |
| Depth | 336 mm | 354 mm |
| Footprint | 672 cm² | 687 cm² |
| Space taken | 28.4 L | 24.7 L |
| Weight | 12.4 kg | 8.7 kg |
| Enclosure | bass-reflex-rear | bass-reflex-rear |
| Drivers | 1× 25 mm tweeter (MAT aluminium dome), 1× 125 mm midrange (aluminium cone), 1× 165 mm woofer (hybrid aluminium cone) | 1× 25 mm tweeter (Pinnacle ring radiator), 1× 165 mm mid-bass (Turbine cone) |
| Crossover frequency | 420 / 2300 Hz | 3000 Hz |
| Frequency — low | 58 Hz | 51 Hz |
| Frequency — high | 28000 Hz | 38000 Hz |
| Sensitivity | 87 dB | 86 dB |
| Impedance | 4 Ω | 4 Ω |
| Recommended amp | 15–180 W | 30–200 W |
| MAP (USD) | $2,999 / pair | $749 / pair |
| Where to buy | Check on Amazon ↗ | Check on Amazon ↗ |
| Brand website | international.kef.com ↗ | polkaudio.com ↗ |
| Product page | Open product page ↗ | Open product page ↗ |
Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.

