TrueScaleAudio

Compare speakers at true scale

Pick two speakers and see them side by side at their real-world size.

Speaker A
Speaker B
References

Front view — side by side at true scale

AKii Audio Kii ThreeBNeumann KH 120 II
Kii Audio Kii Three front view
Neumann KH 120 II front view

Click either cabinet to swap A ↔ B · Reference height: 400 mm (40.0 cm) · 1 mm = 1.40 px

Plan view — footprint at true scale

front wall
A764 cm²191 mm400 mm
B413 cm²182 mm227 mm
0 mm100 mm30 mm
150 mm500 mm300 mm

Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.

Performance — where each one sits in the catalog

BassTrebleCone area
Bass reachTreble reachCone area
Kii Three20 Hz20 kHz987 cm²
KH 120 II44 Hz21 kHz138 cm²
Median39 Hz24 kHz332 cm²
How to read this chart

Each axis spans the range the 114 studio monitors in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 96 active studio monitors — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe. Not shown: Sensitivity, Easy load — neither maker publishes a figure. Active speakers quote no sensitivity and no impedance, because with the amplifier inside both describe the electronics rather than the cabinet.

Kii Audio Kii ThreevsNeumann KH 120 II

The Kii Audio Kii Three stands 40.0 cm tall — about 11.3 cm more than the Neumann KH 120 II at 28.7 cm. The Kii Audio Kii Three reaches deeper in the bass, down to 20 Hz versus 44 Hz. Low frequencies come from a 165 mm cone on the Kii Audio Kii Three and a 130 mm cone on the Neumann KH 120 II. On price, the Kii Audio Kii Three sits higher — about $11,500 a pair against $949 for the Neumann KH 120 II.

Specifications

AB
ManufacturerKii AudioNeumann
ModelKii ThreeKH 120 II
HiFi ladder position#60 of 114 floorstander#19 of 114 floorstander
Height400 mm287 mm
Width191 mm182 mm
Depth400 mm227 mm
Footprint764 cm²413 cm²
Space taken30.6 L11.9 L
Weight19 kg5.4 kg
Enclosuresealedbass-reflex-front
Drivers1× 25 mm tweeter (waveguide soft dome), 1× 127 mm midrange (front-firing cone), 4× 165 mm woofer (Active Wave Focusing array)1× 25 mm tweeter (alloy fabric dome), 1× 130 mm woofer (long-throw composite cone)
Crossover frequency—1700 Hz
Frequency — low20 Hz44 Hz
Frequency — high20000 Hz21000 Hz
Sensitivity——
Impedance——
Recommended amp——
MAP (USD)$11,500 / pair$949 each
Where to buyCheck availability ↗Check on Amazon ↗
Brand websitekiiaudio.com ↗neumann.com ↗
Product pageOpen product page ↗Open product page ↗

Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.