TrueScaleAudio
Compare speakers at true scale
Pick two speakers and see them side by side at their real-world size.
Front view — side by side at true scale
Plan view — footprint at true scale
Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.
Performance — where each one sits in the catalog
| Bass reach | Treble reach | Sensitivity | Easy load | Cone area | |
|---|---|---|---|---|---|
| RP-500M II | 50 Hz | 25 kHz | 92 dB | 8 Ω | 144 cm² |
| Linton | 40 Hz | 20 kHz | 90 dB | 6 Ω | 462 cm² |
| Median | 45 Hz | 25 kHz | 87 dB | 6 Ω | 219 cm² |
How to read this chart
Each axis spans the range the 470 bookshelves in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 385 passive bookshelves — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.
Klipsch RP-500M IIvsWharfedale Linton
The Wharfedale Linton stands 56.5 cm tall — about 22.1 cm more than the Klipsch RP-500M II at 34.4 cm. On footprint the Wharfedale Linton is the wider cabinet (30.0 cm versus 17.1 cm). At 92 dB against 90 dB, the Klipsch RP-500M II is the easier load to drive and plays louder from the same amplifier. The Wharfedale Linton reaches deeper in the bass, down to 40 Hz versus 50 Hz. Low frequencies come from a 133 mm cone on the Klipsch RP-500M II and a 200 mm cone on the Wharfedale Linton. On price, the Wharfedale Linton sits higher — about $1,499 a pair against $549 for the Klipsch RP-500M II.
| A | B | |
|---|---|---|
| Manufacturer | Klipsch | Wharfedale |
| Model | RP-500M II | Linton 85th Anniversary |
| HiFi ladder position | #193 of 470 bookshelf | #429 of 470 bookshelf |
| Height | 344 mm | 565 mm |
| Width | 171 mm | 300 mm |
| Depth | 270 mm | 360 mm |
| Footprint | 462 cm² | 1080 cm² |
| Space taken | 15.9 L | 61 L |
| Weight | 5.95 kg | 18.4 kg |
| Enclosure | bass-reflex-rear | bass-reflex-rear |
| Drivers | 1× 25 mm tweeter (titanium LTS dome), 1× 133 mm mid-bass (Cerametallic cone) | 1× 25 mm tweeter (soft dome), 1× 135 mm midrange (woven Kevlar cone), 1× 200 mm woofer (woven Kevlar cone) |
| Crossover frequency | 1530 Hz | 630 / 2400 Hz |
| Frequency — low | 50 Hz | 40 Hz |
| Frequency — high | 25000 Hz | 20000 Hz |
| Sensitivity | 92 dB | 90 dB |
| Impedance | 8 Ω | 6 Ω |
| Recommended amp | — | 25–200 W |
| MAP (USD) | $549 / pair | $1,499 / pair |
| Where to buy | Check on Amazon ↗ | Check on Amazon ↗ |
| Brand website | klipsch.com ↗ | wharfedale.co.uk ↗ |
| Product page | Open product page ↗ | Open product page ↗ |
Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.

