TrueScaleAudio
Compare speakers at true scale
Pick two speakers and see them side by side at their real-world size.
Front view — side by side at true scale
Plan view — footprint at true scale
Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.
Performance — where each one sits in the catalog
| Bass reach | Treble reach | Cone area | |
|---|---|---|---|
| KH 120 II | 44 Hz | 21 kHz | 138 cm² |
| A17-M | 44 Hz | 23 kHz | 260 cm² |
| Median | 39 Hz | 24 kHz | 332 cm² |
How to read this chart
Each axis spans the range the 114 studio monitors in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 96 active studio monitors — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe. Not shown: Sensitivity, Easy load — neither maker publishes a figure. Active speakers quote no sensitivity and no impedance, because with the amplifier inside both describe the electronics rather than the cabinet.
Neumann KH 120 IIvsPSI Audio A17-M
The PSI Audio A17-M stands 32.0 cm tall — about 3.3 cm more than the Neumann KH 120 II at 28.7 cm. On footprint the PSI Audio A17-M is the wider cabinet (20.0 cm versus 18.2 cm). Low frequencies come from a 130 mm cone on the Neumann KH 120 II and a 180 mm cone on the PSI Audio A17-M. On price, the PSI Audio A17-M sits higher — about $2,339 a pair against $949 for the Neumann KH 120 II.
| A | B | |
|---|---|---|
| Manufacturer | Neumann | PSI Audio |
| Model | KH 120 II | A17-M |
| HiFi ladder position | #19 of 114 floorstander | #33 of 114 floorstander |
| Height | 287 mm | 320 mm |
| Width | 182 mm | 200 mm |
| Depth | 227 mm | 230 mm |
| Footprint | 413 cm² | 460 cm² |
| Space taken | 11.9 L | 14.7 L |
| Weight | 5.4 kg | 7.4 kg |
| Enclosure | bass-reflex-front | bass-reflex-front |
| Drivers | 1× 25 mm tweeter (alloy fabric dome), 1× 130 mm woofer (long-throw composite cone) | 1× 27 mm tweeter (hand-built dome), 1× 180 mm woofer (paper cone) |
| Crossover frequency | 1700 Hz | 3500 Hz |
| Frequency — low | 44 Hz | 44 Hz |
| Frequency — high | 21000 Hz | 23000 Hz |
| Sensitivity | — | — |
| Impedance | — | — |
| Recommended amp | — | — |
| MAP (USD) | $949 each | $2,339 each |
| Where to buy | Check on Amazon ↗ | Check availability ↗ |
| Brand website | neumann.com ↗ | psiaudio.swiss ↗ |
| Product page | Open product page ↗ | Open product page ↗ |
Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.

