TrueScaleAudio
Compare speakers at true scale
Pick two speakers and see them side by side at their real-world size.
Front view — side by side at true scale
Plan view — footprint at true scale
Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.
Performance — where each one sits in the catalog
| Bass reach | Treble reach | Sensitivity | Easy load | Cone area | |
|---|---|---|---|---|---|
| Reserve R200 | 51 Hz | 38 kHz | 86 dB | 4 Ω | 219 cm² |
| Lumina I | 65 Hz | 24 kHz | 84 dB | 4 Ω | 120 cm² |
| Median | 45 Hz | 25 kHz | 87 dB | 6 Ω | 219 cm² |
How to read this chart
Each axis spans the range the 470 bookshelves in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 385 passive bookshelves — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.
Polk Reserve R200vsSonus Faber Lumina I
The Polk Reserve R200 stands 35.9 cm tall — about 7.9 cm more than the Sonus Faber Lumina I at 28.0 cm. On footprint the Polk Reserve R200 is the wider cabinet (19.4 cm versus 14.8 cm). At 86 dB against 84 dB, the Polk Reserve R200 is the easier load to drive and plays louder from the same amplifier. The Polk Reserve R200 reaches deeper in the bass, down to 51 Hz versus 65 Hz. Low frequencies come from a 165 mm cone on the Polk Reserve R200 and a 120 mm cone on the Sonus Faber Lumina I. On price, the Sonus Faber Lumina I sits higher — about $999 a pair against $749 for the Polk Reserve R200.
| A | B | |
|---|---|---|
| Manufacturer | Polk | Sonus Faber |
| Model | Reserve R200 | Lumina I |
| HiFi ladder position | #230 of 470 bookshelf | #56 of 470 bookshelf |
| Height | 359 mm | 280 mm |
| Width | 194 mm | 148 mm |
| Depth | 354 mm | 213 mm |
| Footprint | 687 cm² | 315 cm² |
| Space taken | 24.7 L | 8.8 L |
| Weight | 8.7 kg | 4.4 kg |
| Enclosure | bass-reflex-rear | bass-reflex-front |
| Drivers | 1× 25 mm tweeter (Pinnacle ring radiator), 1× 165 mm mid-bass (Turbine cone) | 1× 29 mm tweeter (DAD soft dome), 1× 120 mm mid-bass (paper cone) |
| Crossover frequency | 3000 Hz | 2000 Hz |
| Frequency — low | 51 Hz | 65 Hz |
| Frequency — high | 38000 Hz | 24000 Hz |
| Sensitivity | 86 dB | 84 dB |
| Impedance | 4 Ω | 4 Ω |
| Recommended amp | 30–200 W | 30–100 W |
| MAP (USD) | $749 / pair | $999 / pair |
| Where to buy | Check on Amazon ↗ | Check availability ↗ |
| Brand website | polkaudio.com ↗ | sonusfaber.com ↗ |
| Product page | Open product page ↗ | Open product page ↗ |
Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.

