TrueScaleAudio

Compare speakers at true scale

Pick two speakers and see them side by side at their real-world size.

Speaker A
Speaker B
References

Front view — side by side at true scale

APolk Reserve R200BSonus Faber Lumina II
Polk Reserve R200 front view
Sonus Faber Lumina II front view

Click either cabinet to swap A ↔ B · Reference height: 359 mm (35.9 cm) · 1 mm = 1.56 px

Plan view — footprint at true scale

front wall
A687 cm²194 mm354 mm
B471 cm²179 mm263 mm
0 mm100 mm30 mm
150 mm500 mm300 mm

Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.

Performance — where each one sits in the catalog

BassTrebleSensitivityEasy loadCone area
Bass reachTreble reachSensitivityEasy loadCone area
Reserve R20051 Hz38 kHz86 dB4 Ω219 cm²
Lumina II55 Hz24 kHz86 dB4 Ω183 cm²
Median45 Hz25 kHz87 dB6 Ω219 cm²
How to read this chart

Each axis spans the range the 470 bookshelves in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 385 passive bookshelves — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.

Polk Reserve R200vsSonus Faber Lumina II

The Polk Reserve R200 stands 35.9 cm tall — about 5.5 cm more than the Sonus Faber Lumina II at 30.4 cm. On footprint the Polk Reserve R200 is the wider cabinet (19.4 cm versus 17.9 cm). The Polk Reserve R200 reaches deeper in the bass, down to 51 Hz versus 55 Hz. Low frequencies come from a 165 mm cone on the Polk Reserve R200 and a 150 mm cone on the Sonus Faber Lumina II. On price, the Sonus Faber Lumina II sits higher — about $1,499 a pair against $749 for the Polk Reserve R200.

Specifications

AB
ManufacturerPolkSonus Faber
ModelReserve R200Lumina II
HiFi ladder position#230 of 470 bookshelf#103 of 470 bookshelf
Height359 mm304 mm
Width194 mm179 mm
Depth354 mm263 mm
Footprint687 cm²471 cm²
Space taken24.7 L14.3 L
Weight8.7 kg5.8 kg
Enclosurebass-reflex-rearbass-reflex-front
Drivers1× 25 mm tweeter (Pinnacle ring radiator), 1× 165 mm mid-bass (Turbine cone)1× 29 mm tweeter (DAD soft dome), 1× 150 mm mid-bass (paper cone)
Crossover frequency3000 Hz1800 Hz
Frequency — low51 Hz55 Hz
Frequency — high38000 Hz24000 Hz
Sensitivity86 dB86 dB
Impedance4 Ω4 Ω
Recommended amp30–200 W30–150 W
MAP (USD)$749 / pair$1,499 / pair
Where to buyCheck on Amazon ↗Check availability ↗
Brand websitepolkaudio.com ↗sonusfaber.com ↗
Product pageOpen product page ↗Open product page ↗

Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.