TrueScaleAudio
Compare speakers at true scale
Pick two speakers and see them side by side at their real-world size.
Front view — side by side at true scale
Plan view — footprint at true scale
Seen from above, both pushed back to the same front wall — the wall behind the speakers. Only height, width and depth are published, so each cabinet is drawn as a rectangle: this is the surface a speaker reserves, not its exact outline. A curved or tapered cabinet takes a little less. How far a speaker should sit from the wall is yours to set: makers rarely publish it, and the ones that do disagree by design.
Performance — where each one sits in the catalog
| Bass reach | Treble reach | Sensitivity | Easy load | Cone area | |
|---|---|---|---|---|---|
| Lumina I | 65 Hz | 24 kHz | 84 dB | 4 Ω | 120 cm² |
| Linton | 40 Hz | 20 kHz | 90 dB | 6 Ω | 462 cm² |
| Median | 45 Hz | 25 kHz | 87 dB | 6 Ω | 219 cm² |
How to read this chart
Each axis spans the range the 470 bookshelves in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of the pair's own class, the 385 passive bookshelves — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.
Sonus Faber Lumina IvsWharfedale Linton
The Wharfedale Linton stands 56.5 cm tall — about 28.5 cm more than the Sonus Faber Lumina I at 28.0 cm. On footprint the Wharfedale Linton is the wider cabinet (30.0 cm versus 14.8 cm). At 90 dB against 84 dB, the Wharfedale Linton is the easier load to drive and plays louder from the same amplifier. The Wharfedale Linton reaches deeper in the bass, down to 40 Hz versus 65 Hz. Low frequencies come from a 120 mm cone on the Sonus Faber Lumina I and a 200 mm cone on the Wharfedale Linton. On price, the Wharfedale Linton sits higher — about $1,499 a pair against $999 for the Sonus Faber Lumina I.
| A | B | |
|---|---|---|
| Manufacturer | Sonus Faber | Wharfedale |
| Model | Lumina I | Linton 85th Anniversary |
| HiFi ladder position | #56 of 470 bookshelf | #429 of 470 bookshelf |
| Height | 280 mm | 565 mm |
| Width | 148 mm | 300 mm |
| Depth | 213 mm | 360 mm |
| Footprint | 315 cm² | 1080 cm² |
| Space taken | 8.8 L | 61 L |
| Weight | 4.4 kg | 18.4 kg |
| Enclosure | bass-reflex-front | bass-reflex-rear |
| Drivers | 1× 29 mm tweeter (DAD soft dome), 1× 120 mm mid-bass (paper cone) | 1× 25 mm tweeter (soft dome), 1× 135 mm midrange (woven Kevlar cone), 1× 200 mm woofer (woven Kevlar cone) |
| Crossover frequency | 2000 Hz | 630 / 2400 Hz |
| Frequency — low | 65 Hz | 40 Hz |
| Frequency — high | 24000 Hz | 20000 Hz |
| Sensitivity | 84 dB | 90 dB |
| Impedance | 4 Ω | 6 Ω |
| Recommended amp | 30–100 W | 25–200 W |
| MAP (USD) | $999 / pair | $1,499 / pair |
| Where to buy | Check availability ↗ | Check on Amazon ↗ |
| Brand website | sonusfaber.com ↗ | wharfedale.co.uk ↗ |
| Product page | Open product page ↗ | Open product page ↗ |
Larger value highlighted in green. For low-frequency extension, lower Hz = greater bass reach, so the deeper side is highlighted.

