Audiovector · R · Floorstander

R 10 Arreté

$165,000 / pairCheck availability ↗
Product description
Audiovector's flagship, and the only model in the range built around a line array: eight 5″ long-throw woofers run up the back of the cabinet, while the front carries three 6½″ carbon-sandwich cones and a pair of 3,800 mm² AMT panels — the upper one a true super-tweeter, crossed in at 20 kHz. Four crossover points, 95 kg a side and a 1.56 m cabinet that is 63 cm deep, which is where most of that volume hides.

Performance — where it sits in the catalog

BassTrebleSensitivityEasy load
Bass reachTreble reachSensitivityEasy load
R 1021 Hz53 kHz90 dB8 Ω
Median32 Hz30 kHz90 dB6 Ω
How to read this chart

Each axis spans the range the 638 floorstanders in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of this speaker's own class, the 590 passive floorstanders — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe. Not shown: Cone area — the maker publishes no figure.

Units
TypeFloorstander
HiFi ladder position#590 of 638 floorstander
PowerPassive
Height1560 mm
Width365 mm
Depth627 mm
Footprint2289 cm²
Space taken357 L
Weight95 kg
EnclosureBass reflex, down-firing port
Drivers1× tweeter (AMT), 1× super-tweeter (AMT), 1× 165 mm midrange (AFC carbon sandwich), 2× 165 mm mid-bass (AFC carbon sandwich), 8× 127 mm woofer (long-throw low-distortion)
Crossover frequency180 / 450 / 3000 / 20000 Hz
Frequency response21–53000 Hz
Sensitivity90 dB
Impedance8 Ω (min 5 Ω)
MAP (USD)$165,000 / pair
Where to buyCheck availability ↗
Manufactureraudiovector.com ↗
Product pageOpen product page ↗

Suggested TrueScale comparisons

Tap any speaker to see it beside this one at true, real-world scale.