Audiovector · Trapeze · Floorstander

Trapeze Ri

Product description
Audiovector's revival of the wedge-shaped Trapeze that Ole Klifoth launched the company with in 1979. The lopsided cabinet leans the baffle back and keeps no two internal surfaces parallel, carrying a 12″ bass driver on an 8″ isobaric reflex loading, a 5″ neodymium midrange and the brand's 3,800 mm² SEC air-motion tweeter. At 42 cm wide and 87.5 cm tall it is squat where most flagships are slim — a wide, shallow tower rather than a narrow one.

Performance — where it sits in the catalog

BassTrebleSensitivityEasy load
Bass reachTreble reachSensitivityEasy load
Trapeze Ri23 Hz53 kHz88 dB8 Ω
Median32 Hz30 kHz90 dB6 Ω
How to read this chart

Each axis spans the range the 638 floorstanders in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of this speaker's own class, the 590 passive floorstanders — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe. Not shown: Cone area — the maker publishes no figure.

Units
TypeFloorstander
HiFi ladder position#30 of 638 floorstander
PowerPassive
Height875 mm
Width420 mm
Depth435 mm
Footprint1827 cm²
Space taken159.9 L
Weight25 kg
EnclosureBass reflex, rear port
Drivers1× tweeter (AMT), 1× 127 mm midrange (neodymium high-resolution 5″), 1× 305 mm woofer (high-power 12″ with 4″ voice coil)
Crossover frequency500 / 3000 Hz
Frequency response23–53000 Hz
Sensitivity88 dB
Impedance8 Ω (min 6.5 Ω)
Power handling450 W
MAP (USD)$19,950 / pair
Where to buyCheck availability ↗
Manufactureraudiovector.com ↗
Product pageOpen product page ↗

Suggested TrueScale comparisons

Tap any speaker to see it beside this one at true, real-world scale.