C1

The standmount that opens Børresen's C-series: the RP94 ribbon planar over a single 5-inch DCC5 Neo whose carbon-fibre and aramid honeycomb cone comes down from the far dearer M-series, with double copper caps on the pole rings to cut inductance and distortion. Milled hardwood laminates with 1 mm carbon-fibre side panels, and a base cut for Ansuz Darkz feet. Unlike the sealed M1 and T1 standmounts this one is reflex-loaded through two rear ports, so it wants room behind it. Sensitivity 87 dB into >6 Ω, >50 W recommended. Supplied with its matching stand, which takes the whole assembly to 1141 mm. Sold as a pair.