Dali · Epikore · Floorstander

Epikore 9

Product description
A four-way Epikore scaled down from the 11 — swapping its four-woofer array for a twin 8″ Clarity-Cone bass section while keeping the same 6½″ midrange and EVO-K Hybrid Tweeter. Tuned to 27 Hz, it's the Epikore for medium-to-large rooms that don't need the flagship 11's footprint.

Performance — where it sits in the catalog

BassTrebleSensitivityEasy loadCone area
Bass reachTreble reachSensitivityEasy loadCone area
Epikore 929 Hz34 kHz88 dB4 Ω876 cm²
Median32 Hz30 kHz90 dB6 Ω654 cm²
How to read this chart

Each axis spans the range the 648 floorstanders in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of this speaker's own class, the 600 passive floorstanders — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.

Units
TypeFloorstander
HiFi ladder position#538 of 648 floorstander
PowerPassive
Height1310 mm
Width439 mm
Depth554 mm
Footprint2432 cm²
Space taken318.6 L
Weight64 kg
EnclosureBass reflex, rear port
Port tuning27 Hz
Drivers1× 55 mm super-tweeter (planar magnetostatic), 1× 35 mm tweeter (soft woven-fabric dome), 1× 165 mm midrange (Clarity Cone paper and wood-fibre, SMC Gen-2 motor), 2× 200 mm woofer (Clarity Cone paper and wood-fibre, SMC Gen-2 motor)
Crossover frequency400 / 3100 / 12500 Hz
Frequency response29–34000 Hz (±3 dB)
Sensitivity88 dB
Impedance4 Ω
Recommended amp40–500 W
MAP (USD)$40,000 / pair
Where to buyCheck availability ↗
Manufacturerdali-speakers.com ↗
Product pageOpen product page ↗

Suggested TrueScale comparisons

Tap any speaker to see it beside this one at true, real-world scale.