Definitive Technology · Dymension · Floorstander

DM70

Product description
The DM80 shrunk by five centimetres and one driver size: same cabinet width and depth, same four 5.25-inch BDSS mid/basses and two aluminium-oxide domes in the bipolar layout, but a 10-inch powered woofer with two 10-inch passive radiators instead of twelves. The amplifier is where the two really part company — 180 watts of class D with DSP here against the flagship's 415 W GaNFET — and the -3 dB point moves from 28 Hz to 30, which is less than the amplifier gap suggests. The mid/treble half stays passive at 4 ohms and 90 dB, wanting 50 to 300 watts from your own amp, and the rear tweeter still has its 0/-6 dB switch. $1,699 each.

Performance — where it sits in the catalog

BassTrebleSensitivityEasy loadCone area
Bass reachTreble reachSensitivityEasy loadCone area
DM7030 Hz23 kHz90 dB4 Ω1072 cm²
Median32 Hz30 kHz90 dB6 Ω654 cm²
How to read this chart

Each axis spans the range the 640 floorstanders in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of this speaker's own class, the 592 passive floorstanders — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.

Units
TypeFloorstander
HiFi ladder position#451 of 640 floorstander
PowerHybrid (active bass)
Height1204 mm
Width287 mm
Depth407 mm
Footprint1168 cm²
Space taken140.6 L
Weight33.6 kg
EnclosurePassive radiator
Drivers2× 25 mm tweeter (aluminium-oxide dome), 4× 133 mm mid-bass, 1× 254 mm woofer
Frequency response30–23000 Hz (±3 dB)
Sensitivity90 dB
Impedance4 Ω
Recommended amp50–300 W
MAP (USD)$1,699 each
Where to buyCheck availability ↗
Manufacturerdefinitivetechnology.com ↗
Product pageOpen product page ↗

Suggested TrueScale comparisons

Tap any speaker to see it beside this one at true, real-world scale.