Suggested TrueScale comparisons
Tap any speaker to see it beside this one at true, real-world scale.
Definitive Technology · Dymension · Floorstander
DM80
$1,999 eachCheck availability ↗
Product description
The flagship of the Dymension range and the only one that got the new amplifier: a 12-inch powered woofer between two 12-inch passive radiators, run by a 415 W GaNFET stage (500 W peak) built for this model alone — the DM70 and DM60 make do with a 180 W class D. Above it is the bipolar array the brand has been making since the 1990s: four 5.25-inch BDSS mid/basses and two aluminium-oxide domes, half of each set facing forward and half facing back, so the speaker fires at the room as much as at the listener. A rear switch cuts the back tweeter by 6 dB, or bi-amping sets the whole rear array anywhere you like. Only the bass is powered — the mid/treble section is passive and still wants 50 to 300 watts of its own, which is why it reads as 4 ohms and 90 dB on the spec sheet. $1,999 each.
Units
| Type | Floorstander |
|---|---|
| HiFi ladder position | #419 of 530 floorstander |
| Power | Hybrid (active bass) |
| Height | 1255 mm |
| Width | 287 mm |
| Depth | 407 mm |
| Weight | 37.7 kg |
| Enclosure | passive-radiator |
| Drivers | 2× 25 mm tweeter (aluminium-oxide dome), 4× 133 mm mid-bass, 1× 305 mm woofer |
| Frequency response | 28–23000 Hz (±3 dB) |
| Sensitivity | 90 dB |
| Impedance | 4 Ω |
| Recommended amp | 50–300 W |
| MAP (USD) | $1,999 each |
| Where to buy | Check availability ↗ |
| Manufacturer | definitivetechnology.com ↗ |
| Product page | Open product page ↗ |
Suggested TrueScale comparisons
Tap any speaker to see it beside this one at true, real-world scale.







