Dynaudio · BM · Studio monitor

BM15A

Product description
The big one in Dynaudio's classic BM range and the only nearfield here with a 10-inch woofer, which at 240 mm is really a midfield driver in a nearfield box. Discrete MOSFET amplifiers rather than class D, 200 watts on the woofer and 100 on an Esotec soft dome with 1000 W of dynamic headroom, split by an analogue phase-aligned crossover at 1.8 kHz. The voice coil is the famous part: 100 mm of aluminium alloy on a driver Dynaudio has been building variations of for decades. Front-ported, radiused baffle edges, 18.6 kg, made in Denmark. The 124 dB maximum SPL is quoted for a pair at one metre, not a single cabinet. $1,579 each.
Units
TypeStudio monitor
HiFi ladder position#64 of 107 studio monitor
PowerActive
Height454 mm
Width290 mm
Depth388 mm
Weight18.6 kg
Enclosurebass-reflex-front
Drivers1× 28 mm tweeter (Esotec soft dome), 1× 240 mm woofer (MSP cone)
Crossover frequency1800 Hz
Frequency response40–21000 Hz (±3 dB)
MAP (USD)$1,579 each
Amplification (per driver)tweeter 100 W · woofer 200 W
Total amp power300 W
Max SPL @ 1 m124 dB
Hi-res audio—
Wired inputsXLR balanced
Streaming / wireless—
Outputs—
Room correction—
Primary + secondary pair—
Wireless inter-speaker link—
Latency—
Idle power—
Max consumption300 W
Where to buyCheck availability ↗
Manufacturerdynaudio.com ↗
Product pageOpen product page ↗

Suggested TrueScale comparisons

Tap any speaker to see it beside this one at true, real-world scale.