Dynaudio · Core · Studio monitor

Core 47

Product description
The Core 7's cabinet laid horizontal with a 4-inch midrange added, and 1150 watts across three channels — 500 each on the woofer and midrange, 150 on the Esotar Pro. Handing 475 Hz to 5.25 kHz to a dedicated driver is what separates it from the two-way: the 7-inch woofer is left to do bass only, and the result is 113 dB anechoic from a box 24 cm tall. Built to lie on its side or go into a console bridge, and sold as mirrored left and right units rather than identical boxes. Front-ported, 41 Hz, 15.6 kg. $2,625 each.

Performance — where it sits in the catalog

BassTrebleCone area
Bass reachTreble reachCone area
Core 4741 Hz24 kHz337 cm²
Median39 Hz24 kHz332 cm²
How to read this chart

Each axis spans the range the 114 studio monitors in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of this speaker's own class, the 96 active studio monitors — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe. Not shown: Sensitivity, Easy load — the maker publishes no figure. Active speakers quote no sensitivity and no impedance, because with the amplifier inside both describe the electronics rather than the cabinet.

Units
TypeStudio monitor
HiFi ladder position#4 of 114 studio monitor
PowerActive
Height240 mm
Width390 mm
Depth355 mm
Footprint1385 cm²
Space taken33.2 L
Weight15.6 kg
EnclosureBass reflex, front port
Drivers1× 28 mm tweeter (Esotar Pro soft dome), 1× 102 mm midrange (MSP cone), 1× 178 mm woofer (MSP cone)
Crossover frequency475 / 5250 Hz
Frequency response41–24000 Hz (±3 dB)
MAP (USD)$2,625 each
Amplification (per driver)tweeter 150 W · midrange 500 W · woofer 500 W
Total amp power1150 W
Max SPL @ 1 m113 dB
Hi-res audio—
Wired inputsXLR balanced, AES/EBU (XLR)
Streaming / wireless—
Outputs—
Room correctionManufacturer presets
Primary + secondary pair—
Wireless inter-speaker link—
Latency—
Idle power—
Max consumption—
Where to buyCheck availability ↗
Manufacturerdynaudio.com ↗
Product pageOpen product page ↗

Suggested TrueScale comparisons

Tap any speaker to see it beside this one at true, real-world scale.