Dynaudio · Core · Studio monitor

Core 7

Product description
A two-way with 500 watts on a 7-inch cone, which is the whole argument: the Core 7 will play at midfield levels from a nearfield cabinet, 112 dB anechoic per speaker at a metre. The tweeter moves up from the Core 5's Cerotar to the Esotar Pro, still with the Hexis inner dome, and the DSP crosses at 2.3 kHz — low enough that the dome is carrying real work. Front-ported to 40 Hz, AES3 in and out alongside XLR, 14.6 kg in dark grey. $2,100 each.

Performance — where it sits in the catalog

BassTrebleCone area
Bass reachTreble reachCone area
Core 740 Hz27 kHz255 cm²
Median39 Hz24 kHz332 cm²
How to read this chart

Each axis spans the range the 114 studio monitors in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of this speaker's own class, the 96 active studio monitors — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe. Not shown: Sensitivity, Easy load — the maker publishes no figure. Active speakers quote no sensitivity and no impedance, because with the amplifier inside both describe the electronics rather than the cabinet.

Units
TypeStudio monitor
HiFi ladder position#55 of 114 studio monitor
PowerActive
Height390 mm
Width220 mm
Depth355 mm
Footprint781 cm²
Space taken30.5 L
Weight14.6 kg
EnclosureBass reflex, front port
Drivers1× 28 mm tweeter (Esotar Pro soft dome), 1× 178 mm mid-bass (MSP cone)
Crossover frequency2300 Hz
Frequency response40–27000 Hz (±3 dB)
MAP (USD)$2,100 each
Amplification (per driver)tweeter 150 W · mid-bass 500 W
Total amp power650 W
Max SPL @ 1 m112 dB
Hi-res audio—
Wired inputsXLR balanced, AES/EBU (XLR)
Streaming / wireless—
Outputs—
Room correctionManufacturer presets
Primary + secondary pair—
Wireless inter-speaker link—
Latency—
Idle power—
Max consumption—
Where to buyCheck availability ↗
Manufacturerdynaudio.com ↗
Product pageOpen product page ↗

Suggested TrueScale comparisons

Tap any speaker to see it beside this one at true, real-world scale.