Dynaudio · LYD · Studio monitor

LYD 48

Product description
The LYD 8 turned on its side and given a dedicated midrange, which changes it more than the shared cabinet suggests: a 4-inch MSP cone takes over from 460 Hz to 5.5 kHz, so the 8-inch woofer stops doing midrange work and the speaker reaches 50 Hz instead of 55. Horizontal by design, which is why it ships as a mirrored left and right rather than a pair of identical boxes — the tweeter sits to the inside on each. 180 watts across three class-D channels, the range's DSP with Bass Extension, Position and Sound Balance, 12 kg. $1,199 each.

Performance — where it sits in the catalog

BassTrebleCone area
Bass reachTreble reachCone area
LYD 4850 Hz21 kHz412 cm²
Median39 Hz24 kHz332 cm²
How to read this chart

Each axis spans the range the 114 studio monitors in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of this speaker's own class, the 96 active studio monitors — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe. Not shown: Sensitivity, Easy load — the maker publishes no figure. Active speakers quote no sensitivity and no impedance, because with the amplifier inside both describe the electronics rather than the cabinet.

Units
TypeStudio monitor
HiFi ladder position#3 of 114 studio monitor
PowerActive
Height234 mm
Width369 mm
Depth328 mm
Footprint1210 cm²
Space taken28.3 L
Weight12 kg
EnclosureBass reflex, rear port
Drivers1× 28 mm tweeter (soft dome), 1× 102 mm midrange (MSP cone), 1× 203 mm woofer (MSP cone)
Crossover frequency460 / 5500 Hz
Frequency response50–21000 Hz (±3 dB)
MAP (USD)$1,199 each
Amplification (per driver)tweeter 50 W · midrange 50 W · woofer 80 W
Total amp power180 W
Max SPL @ 1 m112 dB
Hi-res audio—
Wired inputsXLR balanced, RCA
Streaming / wireless—
Outputs—
Room correctionManufacturer presets
Primary + secondary pair—
Wireless inter-speaker link—
Latency—
Idle power0.5 W
Max consumption100 W
Where to buyCheck availability ↗
Manufacturerdynaudio.com ↗
Product pageOpen product page ↗

Suggested TrueScale comparisons

Tap any speaker to see it beside this one at true, real-world scale.