Estelon · Floorstander

YB Mk II

Product description
The one Estelon that does not use Accuton: a SEAS aluminium woofer, a Scan-Speak Revelator sliced-paper mid and a Scan-Speak Illuminator beryllium dome, in an asymmetric Y-shaped cabinet that gives the model its name. It is also sealed rather than ported, which for a 1.26 m speaker weighing 45 kg means 30 Hz instead of the low twenties — the trade is the tighter, more placement-tolerant bass a closed box gives you. Crossed at 80 Hz and 2 kHz on transformer-core and OFC coils with Mundorf Silver-Gold-Oil capacitors. 6 ohms, 3.0 minimum, 86 dB. $40,250 a pair.

Performance — where it sits in the catalog

BassTrebleSensitivityEasy loadCone area
Bass reachTreble reachSensitivityEasy loadCone area
YB30 Hz40 kHz86 dB6 Ω557 cm²
Median32 Hz30 kHz90 dB6 Ω654 cm²
How to read this chart

Each axis spans the range the 640 floorstanders in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of this speaker's own class, the 592 passive floorstanders — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.

Units
TypeFloorstander
HiFi ladder position#499 of 640 floorstander
PowerPassive
Height1260 mm
Width332 mm
Depth394 mm
Footprint1367 cm²
Space taken172.3 L
Weight45 kg
EnclosureSealed
Drivers1× 26 mm tweeter (beryllium dome), 1× 148 mm mid-bass (sliced paper cone), 1× 220 mm woofer (aluminium cone)
Crossover frequency80 / 2000 Hz
Frequency response30–40000 Hz
Sensitivity86 dB
Impedance6 Ω (min 3 Ω)
Power handling150 W
MAP (USD)$40,250 / pair
Where to buyCheck availability ↗
Manufacturerestelon.com ↗
Product pageOpen product page ↗

Suggested TrueScale comparisons

Tap any speaker to see it beside this one at true, real-world scale.