Gato Audio · FM · Floorstander

FM-30

Product description
The small FM floorstander: three 150 mm mineral-cone drivers and a 38 mm ring radiator in 30 litres, on a curved laminated FusedMass cabinet only 21.5 cm wide at the baffle and under a metre tall. It is a three-way, not the two-and-a-half-way most towers this size settle for — one of the 150s handles the midrange alone while the other two do bass — which is where the 37 Hz comes from. Two ports on the back, and the same rear-panel crossover adjustment as the rest of the range, so the balance can be trimmed to the room by hand. Reworked in 2021 along with the whole FM line: Jantzen crossover parts, new binding posts, a new cabinet supplier and the option of satin black. 87 dB, 4 ohms, 29 kg. Gato no longer publishes a price for it — it is sold on request.

Performance — where it sits in the catalog

BassTrebleSensitivityEasy loadCone area
Bass reachTreble reachSensitivityEasy loadCone area
FM-3037 Hz35 kHz87 dB4 Ω541 cm²
Median32 Hz30 kHz90 dB6 Ω654 cm²
How to read this chart

Each axis spans the range the 640 floorstanders in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of this speaker's own class, the 592 passive floorstanders — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.

Units
TypeFloorstander
HiFi ladder position#91 of 640 floorstander
PowerPassive
Height970 mm
Width310 mm
Depth335 mm
Footprint992 cm²
Space taken96.2 L
Weight29 kg
EnclosureBass reflex, rear port
Drivers1× 38 mm tweeter (ring radiator), 1× 150 mm midrange (mineral cone), 2× 150 mm woofer (mineral cone)
Frequency response37–35000 Hz
Sensitivity87 dB
Impedance4 Ω
Recommended amp50–250 W
Where to buyCheck availability ↗
Manufacturergato-audio.com ↗
Product pageOpen product page ↗

Suggested TrueScale comparisons

Tap any speaker to see it beside this one at true, real-world scale.