JL Audio · Primacy · Bookshelf

Primacy S3

Product description
The stand-mount of JL Audio's ultra-high-end Primacy system — an active two-way with a 5.5-inch polypropylene mid/bass and a 1-inch carbon-fibre tweeter in a sand-cast aluminium cabinet on an integrated pedestal. 400 W of Class D with per-driver DSP at 32-bit/192 kHz over Dante auto-optimises it to the room. A Garmin-era JL Audio flagship.

Performance — where it sits in the catalog

BassTrebleCone area
Bass reachTreble reachCone area
Primacy S336 Hz20 kHz159 cm²
Median43 Hz22 kHz146 cm²
How to read this chart

Each axis spans the range the 470 bookshelves in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of this speaker's own class, the 85 active bookshelves — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe. Not shown: Sensitivity, Easy load — the maker publishes no figure. Active speakers quote no sensitivity and no impedance, because with the amplifier inside both describe the electronics rather than the cabinet.

Units
TypeBookshelf
HiFi ladder position#418 of 470 bookshelf
PowerActive
Height526 mm
Width257 mm
Depth343 mm
Footprint882 cm²
Space taken46.4 L
Weight37.2 kg
EnclosureBass reflex, down-firing port
Drivers1× 25 mm tweeter (carbon-fibre dome), 1× 140 mm mid-bass (polypropylene cone)
Crossover frequency3000 Hz
Frequency response36–20000 Hz
MAP (USD)$17,500 each
Amplification (per driver)tweeter 200 W (class D) · mid-bass 200 W (class D)
Total amp power400 W
Max SPL @ 1 m114 dB
Hi-res audio32 bit / 192 kHz
Wired inputsRCA, XLR balanced, Ethernet
Streaming / wireless—
Outputs—
Room correctionCustom DSP / app
Primary + secondary pair—
Wireless inter-speaker link—
Latency—
Idle power—
Max consumption—
Where to buyCheck availability ↗
Manufacturergarmin.com ↗
Product pageOpen product page ↗

Suggested TrueScale comparisons

Tap any speaker to see it beside this one at true, real-world scale.