JL Audio · Primacy · Floorstander

Primacy T6

Product description
The tower of JL Audio's ultra-high-end Primacy system — an active three-way with a 1-inch carbon-fibre tweeter, a 5.5-inch midrange and four 5.5-inch woofers in a sand-cast aluminium cabinet. 1,000 W of Class D with per-driver DSP at 32-bit/192 kHz over Dante auto-optimises the 123 kg tower to the room. A statement flagship from JL Audio under Garmin.

Performance — where it sits in the catalog

BassTrebleCone area
Bass reachTreble reachCone area
Primacy T632 Hz20 kHz775 cm²
Median30 Hz24 kHz692 cm²
How to read this chart

Each axis spans the range the 648 floorstanders in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of this speaker's own class, the 48 active floorstanders — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe. Not shown: Sensitivity, Easy load — the maker publishes no figure. Active speakers quote no sensitivity and no impedance, because with the amplifier inside both describe the electronics rather than the cabinet.

Units
TypeFloorstander
HiFi ladder position#490 of 648 floorstander
PowerActive
Height1242 mm
Width361 mm
Depth538 mm
Footprint1942 cm²
Space taken241.2 L
Weight123.4 kg
EnclosureBass reflex, down-firing port
Drivers1× 25 mm tweeter (carbon-fibre dome), 1× 140 mm midrange (polypropylene cone), 4× 140 mm woofer (aluminium-alloy cone)
Crossover frequency250 / 3000 Hz
Frequency response32–20000 Hz
MAP (USD)$45,000 each
Amplification (per driver)tweeter 200 W (class D) · midrange 200 W (class D) · woofer 600 W (class D)
Total amp power1000 W
Max SPL @ 1 m112 dB
Hi-res audio32 bit / 192 kHz
Wired inputsRCA, XLR balanced, Ethernet
Streaming / wireless—
Outputs—
Room correctionCustom DSP / app
Primary + secondary pair—
Wireless inter-speaker link—
Latency—
Idle power—
Max consumption—
Where to buyCheck availability ↗
Manufacturergarmin.com ↗
Product pageOpen product page ↗

Suggested TrueScale comparisons

Tap any speaker to see it beside this one at true, real-world scale.