Kanto · Bookshelf

REN

$699.99 / pairCheck on Amazon ↗
Product description
The one built for a television: HDMI ARC with CEC, so the TV remote runs the volume, on top of optical, USB-C and RCA. A 133 mm concave aluminium cone and a 25 mm silk dome, 100 W RMS across the pair, and a flared rear port about 13 cm long that wants room to breathe.

Performance — where it sits in the catalog

BassTrebleCone area
Bass reachTreble reachCone area
REN50 Hz22 kHz144 cm²
Median45 Hz23 kHz154 cm²
How to read this chart

Each axis spans the range the 485 bookshelves in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of this speaker's own class, the 98 active bookshelves — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe. Not shown: Sensitivity, Easy load — the maker publishes no figure. Active speakers quote no sensitivity and no impedance, because with the amplifier inside both describe the electronics rather than the cabinet.

Units
TypeBookshelf
HiFi ladder position#58 of 485 bookshelf
PowerActive
Height277 mm
Width178 mm
Depth215 mm
Footprint383 cm²
Space taken10.6 L
Weight4.5 kg
EnclosureBass reflex, rear port
Drivers1× 133 mm mid-bass (concave aluminium cone), 1× 25 mm tweeter (silk dome)
Frequency response50–22000 Hz
MAP (USD)$699.99 / pair
Amplification (per driver)—
Total amp power100 W
Max SPL @ 1 m—
Hi-res audio24 bit / 96 kHz
Wired inputsHDMI ARC, RCA, Optical (Toslink), USB Audio
Streaming / wirelessBluetooth
OutputsRCA sub-out
Room correction—
Primary + secondary pairYes
Wireless inter-speaker link—
Latency—
Idle power—
Max consumption—
Where to buyCheck on Amazon ↗
Manufacturerkantoaudio.com ↗
Product pageOpen product page ↗

Suggested TrueScale comparisons

Tap any speaker to see it beside this one at true, real-world scale.