Kanto · Bookshelf

UKI

$269.99 / pairCheck on Amazon ↗
Product description
The smallest and cheapest Kanto makes: a 76 mm paper cone and a 19 mm silk dome in a 16.5 cm cabinet, bi-amped at 16 and 9 watts a side. Its USB input tops out at 16-bit/48 kHz where the rest of the range does 24/96 — the one place the price shows.

Performance — where it sits in the catalog

BassTrebleCone area
Bass reachTreble reachCone area
UKI80 Hz22 kHz48 cm²
Median45 Hz23 kHz154 cm²
How to read this chart

Each axis spans the range the 485 bookshelves in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of this speaker's own class, the 98 active bookshelves — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe. Not shown: Sensitivity, Easy load — the maker publishes no figure. Active speakers quote no sensitivity and no impedance, because with the amplifier inside both describe the electronics rather than the cabinet.

Units
TypeBookshelf
HiFi ladder position#4 of 485 bookshelf
PowerActive
Height165 mm
Width112 mm
Depth110 mm
Footprint123 cm²
Space taken2 L
Weight1 kg
EnclosureBass reflex, rear port
Drivers1× 76 mm mid-bass (paper cone), 1× 19 mm tweeter (silk dome)
Frequency response80–22000 Hz
MAP (USD)$269.99 / pair
Amplification (per driver)mid-bass 16 W (class D) · tweeter 9 W (class D)
Total amp power25 W
Max SPL @ 1 m—
Hi-res audio16 bit / 48 kHz
Wired inputsRCA, USB Audio
Streaming / wirelessBluetooth
OutputsRCA sub-out
Room correction—
Primary + secondary pairYes
Wireless inter-speaker link—
Latency—
Idle power—
Max consumption—
Where to buyCheck on Amazon ↗
Manufacturerkantoaudio.com ↗
Product pageOpen product page ↗

Suggested TrueScale comparisons

Tap any speaker to see it beside this one at true, real-world scale.