KEF · Blade · Floorstander

Blade One Meta

Product description
KEF's Single Apparent Source flagship: the curved, slim Blade One Meta places its 12th-gen Uni-Q array (25 mm MAT tweeter plus 125 mm aluminium midrange) acoustically at the same point as four side-firing 225 mm woofers in force-cancelling pairs. Hand-built in Maidstone, it's a statement full-range tower for large, well-driven systems — one of the clearest expressions of KEF's point-source philosophy.

Performance — where it sits in the catalog

BassTrebleSensitivityEasy loadCone area
Bass reachTreble reachSensitivityEasy loadCone area
Blade One Meta35 Hz35 kHz88 dB4 Ω1718 cm²
Median32 Hz30 kHz90 dB6 Ω654 cm²
How to read this chart

Each axis spans the range the 648 floorstanders in the catalog actually cover, so equal distance means equal difference — and for cone area and the two frequencies, which are read as ratios, equal distance means equal ratio. The dashed inner ring is where the scale starts, not zero. Ranked within a class because a bookshelf measured against floorstanders is feeble on every axis for the single reason that it is a bookshelf. Cone area is summed from the drive units — no maker publishes it. Bass and treble reach are quoted to different tolerances and only 56% of the catalog says which, so read those two axes as approximate. The grey outline is the median of this speaker's own class, the 600 passive floorstanders — same type, same side of the active/passive line, which matters because the two halves are not the same product: the median active bookshelf carries 155 cm² of cone against the passive median's 219. Median rather than mean, because a handful of very large cabinets would drag a mean above most of the class it claims to describe.

Units
TypeFloorstander
HiFi ladder position#604 of 648 floorstander
PowerPassive
Height1590 mm
Width321 mm
Depth540 mm
Footprint1733 cm²
Space taken275.6 L
Weight57.2 kg
EnclosureBass reflex, rear port
Drivers1× 25 mm tweeter (MAT aluminium dome), 1× 125 mm midrange (aluminium cone), 4× 225 mm woofer (aluminium cone)
Crossover frequency350 / 2000 Hz
Frequency response35–35000 Hz (±3 dB)
Sensitivity88 dB
Impedance4 Ω (min 2.8 Ω)
Recommended amp50–400 W
MAP (USD)$38,000 / pair
Where to buyCheck availability ↗
Manufacturerinternational.kef.com ↗
Product pageOpen product page ↗

Suggested TrueScale comparisons

Tap any speaker to see it beside this one at true, real-world scale.